Husky WeatherBeater 18491 Care And Use Instructions

Thank you for selecting a WeatherBeater® Floor Liner from Husky Liners. Your new front floor liners are
custom molded to fit your Honda Fit and Honda HR-V. The liners are made to take the place of your factory
floor mats. For correct fit, it is necessary to remove the factory floor mats before installing your new floor
liners. However, do not remove the factory-installed carpeting.
Your liners are made from an engineering resin that is lightweight and extremely tough and durable. The
easiest way to clean your liners is with a damp cloth or sponge. If using a cleaner, 409
well. Use of Armor All
INSTALLATION INSTRUCTIONS FOR YOUR HONDA FIT &
LEFT OR DRIVER'S SIDE
TO EASE INSTALLATION OF YOUR FRONT FLOOR LINERS, SLIDE BOTH FRONT ROW SEATS ALL
THE WAY REARWARD SO AS TO ALLOW THE MOST LEG ROOM. ONCE YOU HAVE INSTALLED
YOUR LINERS, REPOSITION THE FRONT SEATS AS DESIRED. NOTE THAT THE DRIVER'S SIDE
LINER ATTACHES TO THE FACTORY MAT RETAINING FASTENERS LOCATED IN THE CARPET.
View the Husky Liner Lifetime Warranty at
CARE AND USE INSTRUCTIONS
® ®
, Son-of-a-Gun or similar items is discouraged as these products make the liners slick.
HONDA HR-V FRONT FLOOR LINERS
www.huskyliners.com/lifetime-warranty
RIGHT OR PASSENGER'S SIDE
1849_Installation Instructions Front_Back
® ®
or Glass Plus work