Husky WeatherBeater 13011 Care And Use Instructions

Thank you for selecting WeatherBeater® Floor Liners from Winfield Consumer Products. Your new front
floor liners are custom molded to fit your Chrysler Pacifica. The liners are made to take the place of your
factory floor mats. For correct fit, it is necessary to remove the factory floor mats before installing your new
floor liners. However, do not remove the factory-installed carpeting
Your liners are made from an engineering resin that is lightweight and extremely tough and durable. The
easiest way to clean your liners is with a damp cloth or sponge. If using a cleaner, 409
well. Use of Armor All
INSTALLATION INSTRUCTIONS FOR YOUR
CHRYSLER PACIFICA FRONT FLOOR LINERS
LEFT OR DRIVER'S SIDE
TO EASE INSTALLATION OF YOUR NEW FRONT LINERS, MOVE BOTH FRONT SEATS TO THEIR
MOST REARWARD POSITION. WHEN INSTALLING THE LINERS, TAKE CARE TO MAKE SURE
THEY ARE ATTACHED TO THE FACTORY FLOOR MAT POSTS ON THE DRIVER'S SIDE. ONCE
YOU HAVE INSTALLED YOUR LINERS, REPOSITION THE SEATS AS DESIRED.
CARE AND USE INSTRUCTIONS
® ®
, Son-of-a-Gun or similar items is discouraged as these products make the liners slick.
®
RIGHT OR PASSENGER'S SIDE
1301 Installation Instruction Front_Back Instruction
®
or Glass Plus work
09_26_2016