Husky WeatherBeater 136829SL Care And Use Instructions

Thank you for selecting a WeatherBeater® Floor Liner from Winfield Consumer Products. Your new front
floor liners are custom molded to fit your Nissan Rogue. The liners are made to take the place of your factory
floor mats. For correct fit, it is necessary to remove the factory floor mats before installing your new floor
liners. However, do not remove the factory-installed carpeting.
Your liners are made from an engineering resin that is lightweight and extremely tough and durable. The
easiest way to clean your liners is with a damp cloth or sponge. If using a cleaner, 409
well. Use of Armor All
INSTALLATION INSTRUCTIONS FOR YOUR
NISSAN ROGUE FRONT FLOOR LINERS
LEFT OR DRIVER'S SIDE
PLEASE NOTE THAT YOUR NISSAN ROGUE FLOOR LINERS ARE DESIGNED TO ATTACH TO THE
EXISTING FACTORY FLOOR MAT RETENTION HOOKS. THE FACTORY MATS MUST BE
REMOVED BEFORE INSTALLATION. TAKE CARE TO MAKE SURE THE LINER IS FULLY SEATED
OVER THE HOOKS DURING INSTALLATION.
CARE AND USE INSTRUCTIONS
® ®
, Son-of-a-Gun or similar items is discouraged as these products make the liners slick.
RIGHT OR PASSENGER'S SIDE
9867_Installation Instructions 02_20_2014
® ®
or Glass Plus work