Thank you for selecting a WeatherBeater® Floor Liner from Winfield Consumer Products. Your new front
floor liners are custom molded to fit your Toyota Tundra CrewMax and Double Cab trucks. The liners are made
to take the place of your factory floor mats. For correct fit, it is necessary to remove the factory floor mats
before installing your new floor liners. However, do not remove the factory-installed carpeting.
Your liners are made from an engineering resin that is lightweight and extremely tough and durable. The
easiest way to clean your liners is with a damp cloth or sponge. If using a cleaner, 409
well. Use of Armor All
INSTALLATION INSTRUCTIONS FOR YOUR TOYOTA
TUNDRA REGULAR CAB FRONT FLOOR LINERS
LEFT OR DRIVER'S
BEFORE INSTALLING YOUR LINERS REMOVE ANY OTHER FLOOR MATS FROM THE VEHICLE.
BEGIN INSTALLATION BY MOVING YOUR FRONT SEATS TO THEIR MOST REARWARD POSITION. WITH
THIS DONE INSTALL THE DRIVER' SIDE LINER ATTACHING IT TO THE FACTORY TWIST-LOCK
FASTENERS. IF YOU DO NOT HAVE TWIST-LOCK FASTENERS IN YOUR VEHICLE PLEASE CONTACT
YOUR RETAILER OR CALL HUSKY LINERS AT 800-344-8759. NOTE THAT THE LINER SETS OVER THE TOP
OF THE TWIST-LOCK FASTENER AND THEN THE TOP OF THE FASTENER IS TWISTED 90º TO SECURE THE
LINER IN PLACE (SEE ATTACHED PHOTO).
CARE AND USE INSTRUCTIONS
®
®
, Son-of-a-Gun
or similar items is discouraged as these products make the liners slick.
SIDE
RIGHT OR PASSENGER'S SIDE
1856 Installation Instruction Front_Back with warranty
®
®
or Glass Plus
work
02/19/2013
Need help?
Do you have a question about the WeatherBEATER 18561 and is the answer not in the manual?
Questions and answers