Safety Information WARNING: To reduce risk of injury and property damage, you must read this entire guide before assembling, installing, and operating the dispenser. WARNING: This product dispenses water at very high temperatures. Failure to use properly can cause personal injury. When operating this dispenser, always exercise basic safety precautions, including the following: Prior to use, this dispenser must be properly assembled and installed in accordance with this •...
Intended Use This dispenser is intended to be used in household and similar applications such as: • Staff kitchen areas in shops, offices, and other working environments • Farm houses • Hotels, motels, and other types of residential environments • Bed-and-breakfast type environments •...
Indicator Panel Description 1� Power indicator – When illuminated, indicates that the dispenser is on. When blinking, indicates that the self-cleaning feature is operating. 2� Hot water indicator light – When illuminated, indicates that the dispenser is heating water. 3� Cold water indicator light –...
3� Install the filters Twist each filter (parts 16 and 17) clockwise into the filter housings located inside the dispenser cabinet. The sediment filter (part 16) goes on the left, the carbon filter (17) goes on the right. 4� Connect a Water Bottle IMPORTANT: To prevent dry heating, do NOT turn the red hot-water and green cold-water switches on the back of the unit to the On position until you complete the steps in this procedure.
D� Slide the water bottle into the dispenser cabinet and close the door. E� Plug the unit into a wall outlet, turn the green cold-water switch and the red hot-water switch to the On position. Wait 5 minutes for the water tanks to fill with water before attempting to use the dispenser.
Dispense Hot Water and Activate Child Safety Lock CAUTION: This unit dispenses water at temperatures that can cause severe burns. Avoid direct contact with hot water. Keep children and pets away from the unit while dispensing. Never allow children to dispense hot water without proper and direct supervision. Disable the heating feature by switching the red hot-water switch to the Off position.
Problem Solution • Make sure the power cord is properly connected to a working outlet. The nightlight is not working. • Make sure the night light power switch on back of dispenser is in the On position. • Ensure the dispenser is located on a hard, level surface. The dispenser is noisy.
Filter Replacement Schedule Filter Type Replacement Schedule Function Performs a coarse filtration of original water. Removes mud, Sediment 6 months or 950 gallons sand, iron, rust, suspensions, and impurities. Carbon 6 months or 950 gallons Reduces chlorine, taste and odor, lead, and cysts. Replace the Filters IMPORTANT: Only replace the filters with new filters designed for this dispenser.
Empty and clean the drip tray and grid as needed. Warranty Brio (“Vendor”) warrants to the original purchaser of the Brio Water Coolers (the “Product”), and to no other person, that if the Product is assembled and operated in accordance with the printed instructions accompanying it, then for a period of one (1) year from the date of purchase, all parts in the Product shall be free from defects in material and workmanship.
Need help?
Do you have a question about the CLNLPOU520SCF2B and is the answer not in the manual?
Questions and answers