Subscribe to Our Youtube Channel
Related Manuals for BRIO CLNLPOU520SCFF2
Summary of Contents for BRIO CLNLPOU520SCFF2
- Page 7 Before first use and after replacing the filters each time, place a bucket below the Drain Outlet(part 21) , open the drain outlet. Flush the filters for 5-10 minutes ou until the water runs clear. Discard the water, close the drain outlet.
- Page 8 Step 1：Mix 1.5 gallons of water with 50g citric acid crystals（not include）or cleaning solution of your choice. Step 2：Pour this cleaning solution into the 5 gallon water bottle. Step 3：Turn the valve above the sediment filter to the off position（perpendicular to the tubing). Step 4：Place a bucket below the Pump Cleaning Drain.
- Page 9 Step 7：Once the cleaning solution is depleted, refill another gallon of tap water into the water bottle. Step 8：Once the water stops flowing out of the Pumping Cleaning Drain，you can replace the plug into the Pumping Cleaning Drain. Step 9：Turn the valve above the sediment filter to the on position（parallel to the tubing） Enjoy your water.
Need help?
Do you have a question about the CLNLPOU520SCFF2 and is the answer not in the manual?
Questions and answers