Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for BRIO Signature Series
Summary of Contents for BRIO Signature Series
- Page 1 WATER COOLER USER’S MANUAL Thank you for purchasing a Brio water cooler. Please read this user’s manual thoroughly for using the water coolers safely and appropriately. CL800U Signature Series Point of Use Cooler Hot & Cold, Stainless Steel...
- Page 2 SAFETY PRECAUTIONS • Plug in the dispenser in the way described in this manual. • In accordance with these instructions, the dispenser must be properly located and installed before use • Use only water. Do not use co ee, tea or other beverages. •...
- Page 3 Remove the Air inside the Hot Water Tank After installing the lter, remove the air inside the Hot Water Tank by pressing and holding the Hot Water Lever as shown in the following gure until water starts to come out of the water outlet.
- Page 4 Cold Water Faucet (Blue Lever) and Hot Water Faucet (Red Lever) Press the Blue Lever for Cold Water and Red Lever for Hot Water, respectively. Place a cup directly below a faucet and depress the correct lever ,but be careful using the hot water. How to use Child Lock Lever TYPE 1 TYPE 2...
- Page 5 It is highly recommended to have your water dispenser installed by a professional (licensed) plumber. If you are installing the water dispenser yourself, the following information is imoportant. Filter Installation Make sure that valves of cold water piping are securely closed before installation. •...
- Page 6 Cleaning the POU cooler 1. Disconnect power cord from outlet. 2. Remove top of cooler and inner oat assemby to expose the cold tank below. 3. Drain reservoir through the cold water (light blue) faucet and the hot water (red if you have a hot and cold water cooler) faucet into a bucket and throw that away.
- Page 7 TROUBLESHOOTING Please check the following items prior to asking for repair Troubles Things to check Troubleshooting Water shut-off valves. Open all water shut-off valves. Water does not come out (Cold Water & Hot Water) Is the air inside the Tank removed Press and hold the lever until the water completely? comes out through Hot Water Faucet.
- Page 8 About 1.52ℓ (Stainless Steel Tank) * For the improvement of product Brio reserves the right to change specifications without notice. * You must confirm the correct voltage(V) and frequency(Hz) and then plug to the outlet. Check the proper voltage in the back of dispenser.
Need help?
Do you have a question about the Signature Series and is the answer not in the manual?
Questions and answers