Installation; General Warnings; Placement - Wasp CLAY 40100LDM User And Maintenance Manual

4 INSTALLATION

4.1. General Warnings

Reading this chapter assumes, for the purpose of safe use of the printer, knowledge of the contents of Section
1.6 "General Safety Warnings."
In addition, specific requirements for safely interacting with the printer, related to this chapter, are detailed in
the following sections.
CAUTION:
• The operations involved in these activities must be carried out by authorized and
professionally qualified personnel.
• A thermal-magnetic protection device must be inserted upstream of the system.
CAUTION:
The operator must wear all necessary Personal Protective Equipment (PPE) during operations.

4.1.1. Placement

The installation of the printer must be in a suitable place, i.e., such that normal operation of the printer, routine
and extraordinary maintenance can be carried out.
The installation site must be free of contaminants of any kind, dust, fumes, mists, etc.
Therefore, the necessary operating space must be provided by referring to the dimensions (expressed in mm)
given in Section 2.3 "Technical Data."
The room must also be:
• Equipped with the appropriate power supply line;
• Installed in environments with lighting equivalent to that provided for industrial environments; as indicated
by the regulations in force in the country of destination, regarding safety in working environments. The
lighting must not cause visual disturbing effects on the transparent part of the door. The lighting must
ensure perfect reading of the information given by the display.
The printer must be placed on a stable, horizontal plane having a load bearing capacity adequate for the weight
to be supported. Any unevenness must be within the standards of building construction.
The printer should be placed in an environment with foundations that prevent the transmission of
environmental vibrations.
Once the printer is placed, lock the front wheels with the brakes.
CAUTION:
Do not place the printer near sources of heat, water or other free liquids.
Do not install the printer without proper safeguards.
NOTE:
Good installation not only gives more rigidity to the printer but also prevents vibration and noise.
© WASP S.r.l.
4
Installation
21