Summary of Contents for Friedrich WallMaster WCT08
Page 1
This Owner's Manual is provided and hosted by Appliance Factory Parts. FRIEDRICH WET10A33A Owner's Manual Shop genuine replacement parts for FRIEDRICH WET10A33A Find Your FRIEDRICH Air Conditioner Parts - Select From 1575 Models -------- Manual continues below --------...
Thank you for your decision to purchase the Friedrich High Efficiency Air Conditioner. Your new Friedrich has been carefully engineered and manufactured to give you many years of dependable, efficient operation, maintaining a comfortable temperature and humidity level. Many extra features have been built into your unit to assure quiet operation, the greatest circulation of cool, dry air, and the most economic operation.
Safety Precautions Your safety and the safety of others is very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is a safety Alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol with the word “WARNING”...
Standard Filter Cleaning / Installation Instructions HOW TO CLEAN YOUR AIR FILTER Your Friedrich room air conditioner is equipped with a permanent/ washable mesh air filter. The filter serves to remove dust, pollen, and other impurities from the air. CHECK FILTER LIGHT Your Friedrich room air conditioner is equipped with a check filter light that will illuminate after *45 –...
Control Panel Operation Accessing Sub-Menus The leftmost MENU button accesses the sub-menu. See Figure 5. The arrow buttons navigate the 6 menu options (See Figure 6): – LIM – LOCK – TM – CnCT – F-C – diAG The rightmost button exits the menu. See Figure 7. Figure 5 MENU Figure 6...
Page 7
Control Panel Operation The LIM Menu This is the limit menu. See Figure 10. Then you can set the higher setpoint limit using the arrow buttons. See Figure 12. Upon entering the menu, the first option will be to set the lower setpoint limit using the arrow buttons.
Page 8
Control Panel Operation The TM Menu continued Auto mode selected. See Figure 18. Note: The auto mode timer sets both the cool and heat setpoint. Set the cool setpoint for your first timer period using the arrow buttons. Set the time to start the first timer period. See Figure 21. The cooling mode timer only sets the cool setpoint.
Page 9
Control Panel Operation The F-C Menu This menu is used to toggle between Fahrenheit and Celsius. This is the Fahrenheit/ Celsius Menu. See Figure 25. Using the arrow buttons on the right side switches it from Fahrenheit to Celsius. See Figures 26 and 27. Figure 25 MENU Figure 26...
Page 10
Control Panel Operation The Lock Menu continued Set the second digit of the password using the same method. Set the fourth digit of the password using the same method. See Figure 32. See Figures 34. Set the third digit of the password using the same method. Press the leftmost button to complete the password process.
Page 11
Control Panel Operation The CnCT Menu This menu is used to turn on Wi-Fi connection. This is the CnCT menu. Pressing the leftmost button will activate Wi-Fi. See Figure 40. The Wi-Fi symbol in the top right corner of the display shows Wi-Fi connection is on.
Customizable Programming Options: and scheduling including wireless capabilities. Customizable timers, with up to four temperature adjustments per day, can be set using Friedrich Connect for one or multiple units. Wireless Programming and Control: See www.friedrich.com for complete details on Friedrich Connect.
Control Panel Operation Instructions SYSTEM - The MODE button allows you to sequentially select up to four Alerts modes of operation: When the filter needs to be cleaned or replaced, the CHECK FILTER AUTO Available on select models icon displays. COOL HEAT Available on select models...
Installation Instructions READ THIS FIRST! Electrical Requirements WARNING WARNING MOVING PARTS HAZARDS Electrical Shock Hazard • Do not operate unit out of sleeve or with front grille removed. Make sure your electrical receptacle has the • same configuration as your air conditioner’s Do not place hands in blower or fan blade areas.
Page 15
Installation Instructions for WSE Sleeve continued Installation Requirements Sleeve Requirements STEP 1. The WSE sleeve should be positioned so that the drain STEP 1. After unpacking the WSE sleeve from the carton, remove the extension extends a minimum of ″ beyond the outside wall indoor weather panel.
New construction allowing for condensate drain systems built that remains in the chassis basepan is drained into the sleeve pan within the walls can use the Friedrich Interior Drain Kit (Accessory on WET and WHT models to prevent freezing. (NOTE: In the cooling #IDK).
Page 17
Troubleshooting Tips continued COMPLAINT CAUSE SOLUTION • Do not try to operate your air conditioner in the • The outside temperature is below 60 °F cooling mode when the outside temperature is below (16 °C). 60 °F (16 °C). The unit will not cool properly, and the unit may be damaged.
Page 18
Friedrich Air Conditioning Co. 10001 Reunion Place, Suite 500 • San Antonio, Texas 78216 1-800-541-6645 www.friedrich.com Printed in Mexico 93001017_00...
Need help?
Do you have a question about the WallMaster WCT08 and is the answer not in the manual?
Questions and answers