Elecom SHELLPHA M-SH20BBS User Manual page 7

⑥ LED light
During pairing standby state, the LED blinks.
The LED will light up for a period of time when the mouse is switched ON.
The LED will blink during use when the battery level is low.
⑦ Battery cover
Remove this cover to replace the battery.
⑧ Optical sensor
The LED will light up blue when the power is on.
This sensor will detect mouse movements when you move the mouse.
* Please note that looking directly into the sensor light may hurt your eyes.
⑨ Pairing button
Pair the mouse with your deviceʼs Bluetooth module or a Bluetooth adapter.
⑩ Power switch/device selection switch
Turn the mouse on or off and switch between connected devices.
Please refer to "Switch connected
⑪ Battery storage compartment
Holds the battery.
⑫ Battery insulating tab
Remove this tab before using.
Switch connected device
This product can be used to switch between two Bluetooth devices.
Switch between connected Bluetooth devices in the following way.
Switch when pairing
1) Slide the power switch/device selection switch to choose between "CH1" and
"CH2".
The LED will light up for a period of time when the connected device is
changed.
device".