Dynex DX-R20TR User Manual page 40

DX-R20TR.fm Page 39 Thursday, January 18, 2007 3:19 PM
Using the TV
3 Press the CH+ or CH+ button to select DTV CC, then press the VOL+ button.
4 Press the CH+ or CH– button to select CAPTION MODE.
5 Press the VOL+ button, then press the VOL+ or VOL– button to select ON or OFF.
This is my original question.
"Step 5 does not make sense to me. If I press the VOL+ button, then press the VOL+ or
VOL– button, seems like I am just switching between on and off repeatedly. Should
this step be: Press the VOL+ or VOL– button to select ON or OFF?"
The review comment said to add the information on the bottom of page 29 in the
source. That information is included in step 6. The comment did not answer my
original question.
In step 5, I press VOL+, then press it again. This does not seem correct. Should the step
be "Press the VOL+ button to select ON or OFF."?
6 Press the CH+ or CH– button to select DTV CC, then press the VOL+ or VOL– button
to select the service level you want. There are six service levels. SERVICE1 provides
closed captions for the audio language for the program. SERVICE2 provides a
secondary audio language for the program. The other service levels vary depending on
the program.
Notes: CAPTION MODE must be turned on to select a service level.
When you turn on closed captions, it takes about ten seconds before captioning appears.
If the program does not have closed captions, no captions are displayed, but your TV combo is
still in CAPTION MODE. If you change to a channel that has closed captions, the captions are
displayed.
Misspellings or unusual characters may appear in closed captions. This is normal, especially
for live programs because the captions are entered live with no time for editing.
39