Download Print this page
CalderaSpas Utopia Series Quick Start Manual
Hide thumbs Also See for Utopia Series:

Advertisement

Quick Links

Utopia
Series.
®
Q U I C K S TA R T G U I D E

Advertisement

loading
Need help?

Need help?

Do you have a question about the Utopia Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for CalderaSpas Utopia Series

  • Page 1 Utopia Series. ® Q U I C K S TA R T G U I D E...
  • Page 2 QR code below or visit Before filling your spa, take a sample of the water you calderaspas.com to find a digital copy of: will use to fill your spa to your local dealer for testing to •...
  • Page 3 S E T TH E W ATE R T EMPERAT U RE BALANC E YO UR WAT ER Use the spa’s control panel to set the temperature to Dip a FreshWater® 5-Way 5-way test strip your desired level, which should be at least 95°F (35°C). Test Strip into the water for We recommend temperatures between 100°F (38°C) and two seconds, remove and...
  • Page 4: Using The Control Panel

    Using the Control Panel. Maintenance Tips. Touch anywhere on the screen to turn on the control panel. PROT ECT YOUR INVESTMENT FOR YEARS TO COME WI TH T HESE IMPORTA NT TIPS. C ARE FOR YOUR SPA SHELL AND COVER •...
  • Page 5: Important Safety Instructions

    Important Safety Instructions. R EA D A LL OF THIS IN FOR MAT IO N BEFORE US ING YOUR SPA...
  • Page 6: Safety Information

    audio system unless approved by Watkins Wellness . afety nformatIon • Do not self service audio component by opening spa door as this may expose dangerous voltage or other risk of injury. Refer all servicing to qualified service personnel. (READ AND FOLLOW ALL •...
  • Page 7 • Persons taking medications which induce drowsiness, such as DANGER - RISK OF ELECTRICAL SHOCK tranquilizers, antihistamines, or anticoagulants should not use the spa. • Install at least 5 feet (1.5 m) from all metal surfaces. A spa may be installed within 5 feet (1.5 m) of a metal surface if each metal surface HEALTH PROBLEMS AFFECTED BY SPA USE is permanently connected by a minimum No.
  • Page 8: Important Spa Instructions

    SPA SHELL AVOIDING THE RISK OF SKIN BURNS Your CALDERA spa has an acrylic shell. Stains and dirt generally will not adhere to your spa’s surface. A soft rag should easily remove most • To reduce the risk of injury, before entering a spa the user should dirt.
  • Page 9: Electrical Requirements

    Electrical Requirements.
  • Page 10: 230 Volt Permanently Connected

    The grounding conductor must not be less than #10 AWG. Refer to lectrIcal equIrementS local codes and to NEC 250-122 (table). NOTE: The CANTABRIA will require an additional 20 amp breaker IMPORTANT: Fill the spa with water before turning on the power. in order to operate the heater and the Lounge seat (jet pump 3) at Your CALDERA spa has been carefully designed to give you the same time.
  • Page 11: Before Turning On The Power

    IMPORTANT: If you ever need to move or relocate your CALDERA spa, it is essential that you understand and apply these installation requirements. Your CALDERA spa has been carefully engineered to provide maximum safety against electric shock. Remember, connecting the spa to an improperly wired circuit will negate many of its safety features.
  • Page 12: Use Copper Conductors Only

    CANTABRIA - CONVERTED TO 70 AMP Remove power jumpers A from TB WARNING: FILL THE SPA WITH WATER BEFORE TURNING ON THE POWER! (SEE STARTUP PROCEDURES.) CAUTIONS USE COPPER CONDUCTORS ONLY THESE SPAS ARE INTENDED FOR USE WITH GFCI SUBPANEL PROVIDED.