Download Print this page

Advertisement

Quick Links

2007 Utopia / Aquatic Melodies
Please take the time to read this booklet carefully, as it will provide you with the information you will need to ensure the
safe, secure, and timely installation of your new spa. The following sections are guidelines on how to prepare for delivery
and set-up of your new spa. Specifically covered are site selection, delivery access, ground preparation, and electrical
requirements.
Remember to carefully read the Owner's Manual that accompanies your spa and to complete the warranty card within ten
days of delivery. These items, along with other valuable information, included in the Owner's Package which can be
located in the equipment compartment of your spa. You will also find your serial number, in the equipment compartment.
Watkins Manufacturing Corporation reserves the right to change features, specifications and design without notification
and without incurring any obligation.
DATE PURCHASED: ________________________________________________________________________
DATE INSTALLED: __________________________________________________________________________
DEALER: ____________________________________________________________________________________
ADDRESS: __________________________________________________________________________________
TELEPHONE: ______________________________________________________________________________
In most cities and counties, permits will be required for the installation of electrical circuits or the construction of exterior
surfaces (decks and spa enclosures). In addition, some communities have adopted residential barrier codes which may
require fencing and/or self-closing gates on the property to prevent unsupervised access to a pool (or spa) by children
under 5 years of age. Your Caldera
Safety Covers and as a result, is usually exempt from most barrier requirements. As a general practice, your local Building
Department will inform you of any applicable barrier requirements at the time a permit is obtained for the installation of
an electrical circuit. Your Caldera dealer can provide information on which permits may be required.
Pre-Delivery Instructions
®
spa is equipped with a locking cover that meets the ASTM F1346-91 Standard for
®
/ Paradise

Advertisement

loading
Need help?

Need help?

Do you have a question about the Paradise and is the answer not in the manual?

Questions and answers

Summarization of Contents

Site Selection and Preparation
Indoor/Basement Installation
Guidelines for indoor spa installation, focusing on flooring, drainage, and humidity control to prevent damage.
Deck Installation
Considerations for placing a spa on an elevated deck, emphasizing load capacity and structural support requirements.
Outdoor and Patio Installation
Advice on installing a spa on outdoor surfaces, stressing the importance of a stable, level foundation.
Delivery Access and Specifications
Clearance Requirements and Model Dimensions
Guidance on assessing delivery path clearances and a table of spa dimensions to ensure access.
Model-Specific Dimension Diagrams
Detailed diagrams illustrating the dimensions and key features for specific Caldera spa models.
Electrical Requirements
230 Volt Installation
Instructions for the required 230V, 50 amp dedicated circuit, GFCI protection, and wiring connections.
Power Connection and Dealer Services
Services Available from Your Caldera® Spa Dealer
A list of professional services offered by dealers, including site inspection, setup, and maintenance orientation.