Classeq P500DUO Quick User Manual

P500 & P500DUO
Pass Through Warewasher
Quick User Guide
Caution
Only use this Quick User Guide after the
Warewasher has been fully commissioned.
See Section 5 in the User Manual.
1
Turning the warewasher on
Push the 'ON' button, the button will flash amber to indicate
pre-heating and water filling of the machine. You can continue
to prepare the machine whilst this process occurs.
3
Warewasher start cycle
Once the temperature and water cycle is complete, the amber
START button will illuminate green and your program will start.
4
Confirming your selection
Cycle indicator will illuminate blue to show a program selection
has been made.
5
Selecting a wash program (optional)
If you do not require the default
program then choose your
desired program using the
SELECT button until the display
shows the program you require.
2
Loading the warewasher
Open the hood to load a basket. Before loading, ensure debris
is rinsed from the items. With the basket in place, close the
hood.
See the User Manual for loading information.
1.5 Mins
*
3 Mins
5 Mins
*
Default program