Using Set Menu - Yamaha HTR-6050 Owner's Manual

Option menu 3 OPTION MENU
Use this menu to manually adjust the optional system parameters.
Parameter
A)DISPLAY SET
B)MEMORY GUARD
C)AUDIO SELECT
D)PARAM. INI
E)USB PLAY STYLE
■ Signal information
Use this feature to check audio signal information (see page 35).

Using SET MENU

Use the remote control to access and adjust each
parameter.
y
You can change the "SET MENU" parameters while this unit is
reproducing sound.
Press D AMP and then press Q MENU to
1
enter "SET MENU".
The top "SET MENU" display appears in the OSD.
SET MENU
TOPAMENU
. ;AUTO SETUP
.A;MANUAL SETUP
;SIGNAL INFO
[ ]/[ ]:Up/Down
[ENTER]:Enter
2
Press G k / n to select "MANUAL SETUP".
SET MENU
TOPAMENU
;AUTO SETUP
.A;MANUAL SETUP
;SIGNAL INFO
[ ]/[ ]:Up/Down
[ENTER]:Enter
Adjusts the brightness of the front panel display.
Locks sound field program parameters and other "SET MENU" settings.
Designates the default audio input jack select setting for the input sources connected to the
DIGITAL INPUT jacks when you turn on the power of this unit.
Sets all the parameters of the sound field programs to the factory settings.
Adjusts the playback style of a USB source.
SIGNAL INFO
Features
Press G ENTER to enter "MANUAL SETUP".
3
The "MANUAL SETUP" display appears in the
OSD.
;MANUAL SETUP
. 1 SOUND MENU
2 INPUT MENU
3 OPTION MENU
[ ]/[ ]:Up/Down
[ENTER]:Enter
Press G k / n / l / h and G ENTER to select
4
and change the parameter.
• Press G k / n to select the desired menu or
parameter.
• Press G l / h to change the parameter value.
• Press G ENTER to enter the selected menu or to
confirm the parameter.
• Press H RETURN to return to the previous menu
level.
Press Q MENU to exit from "SET MENU".
5
SET MENU
Page
54
55
55
55
55
47
En