Connecting Speakers - Yamaha HTR-6050 Owner's Manual

Connections

Connecting speakers

Be sure to connect the left channel (L), right channel (R), "+" (red) and "–" (black) properly. If the connections are faulty,
this unit cannot reproduce the input sources accurately.
Caution
• Before connecting the speakers, make sure that this unit is turned off (see page 21).
• Do not let the bare speaker wires touch each other or let them touch any metal part of this unit. This could damage
this unit and/or the speakers.
• Use the magnetically shielded speakers. If this type of speaker still creates interference with the monitor, place the
speakers away from the monitor.
• If you are to use 6 ohm speakers, be sure to set "SP IMP." to "6Ω MIN" before using this unit (see page 13).
Note
A speaker cable is actually a pair of insulated cables running side by side. Cables are colored or shaped differently, perhaps with a stripe,
groove or ridge. Connect the striped (grooved, etc.) cable to the "+" (red) terminals of this unit and your speaker. Connect the plain cable
to the "–" (black) terminals.
COMPONENT VIDEO
DVD DTV/CBL
P
R
DIGITAL INPUT
P
B
OPTICAL
Y
CD
MULTI CH INPUT
FRONT
DTV/
CBL
L
DVD
R
COAXIAL
12
En
Surround speakers
Right
OUT DVD DTV/CBL
VIDEO
DVR MONITOR DVD DTV/CBL DVR MONITOR
IN OUT
OUT
S VIDEO
VIDEO
AUDIO
DVD
SURROUND CENTER
L
R
SUBWOOFER
Left
Center
speaker
Center speaker
ANTENNA SPEAKERS
HDMI
OUT
AM
GND
FM
R L
SURROUND CENTER
75
UNBAL.
OUTPUT
Subwoofer
Front speakers (B)
Right Left
Subwoofer
R L
FRONT B
R FRONT A L
Right Left
Front speakers (A)
AC OUTLETS