Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Himiway A7 PRO
Summary of Contents for Himiway A7 PRO
- Page 1 A7 PRO Guide & Manual...
-
Page 3: About Manual
Read it carefully and familiarize yourself Go to page 10 to find your serial numbers with the Himiway Bike before using it to ensure safe use, reduce risk of damage and premature wear, and prevent accidents. Be sure to retain this manual as your convenient Himiway Bike information source. -
Page 4: Safety Information
BEFORE OPERATION above ambient temperatures of -10°C (14°F).” The blanks are to be filled in Before operation of your new Himiway e-bike, it is crucial for your safety and per with the manufacturer’s specified ambient temperature ratings. the manufacturer's requirement, that you thoroughly read and understand this instruction manual. -
Page 5: Range Reference Table
RISK OF INJURY: with a gradient of 0 is called a long-range e-bike. Road Safety: Riding an e-bike, like the Himiway A7 Pro, comes with inherent ◆ Description of the definition risks. Always adhere to traffic laws, and be aware of your surroundings to avoid collisions and accidents. - Page 6 Bike Specification LCD Color Display Power Switch Shimano Shift Lever Saddle Rear Shock Battery ABUS Lock LED Headlight 193 cm 48.7 cm - Total Length - Standover Height Tail Light 111 cm 61 cm - Handlebar Height - Top Tube Length 71.3 cm 122 cm - Wheelbase...
- Page 7 Bike Specification Battery 48V 15Ah LG-21700 lithium battery Pedal Assist 0~5 level pedal assist Frame 6061 alloy frame Display BIGSTONE M300C-TFT Recommended Rider Drive Unit ANANDA M100 48V-250W 162 cm to 187 cm Heights Headset GINEYEA Bearing headsets Charger 2.0 A smart charger Range 80 KM Fork...
-
Page 8: Preparation Checklist
• Avoid battery damage during the assembly process. Go to page 14 to learn about removing and charging the battery. Crank Bolts 32-36 Rear Derailleur Cable Pinch *Follow our Youtube channel Himiway Bikes to watch bike assembly tutorials！ Front Derailleur Clamp Saddle Post Clamp NOTICE: NOTICE:... -
Page 9: Front Wheel Installation
Assembly Instructions Assembly Instructions ◆ Handlebar Installation(4mm Hex Wrench) ◆ Handlebar Installation(4mm Hex Wrench) ◆ Front Wheel Installation Step 1: Step 1: Loosen the bolts on your bike stem. Loosen the bolts on your bike stem. Step 1: Lay a mat down to protect both bike and floor from scratches. Next, carefully flip Step 2: Step 2: Center your handlebars and rotate them to align to the marking pointed to in the... - Page 10 Step 2: Remove the plastic axle guards from the front wheel, being careful to avoid Step 5: Align the hole in the center of the tire with the hole in the hub axle. Then, insert contact with the brake rotor set. and secure the hub axle while ensuring that the brake pads of the front wheel are properly engaged with the brake.
- Page 11 ◆ Front Fender Installation (Extra Tool: 3mm Wrench) ◆ Pedals Installation (15mm wrench) Make sure your pedals are installed on the correct side, as installing on the wrong side Step 1: Step 1: Loosen the bolt on the fork brace. Align the bolt holes of the front fender with the will damage the threads.
-
Page 12: Seat Adjustment
◆ After Bike Assembly ◆ Seat Adjustment Please write down the serial numbers found on the head tube, battery and motor on the Adjust the Seat Height: inside front cover of this manual to facilitate failure reporting. Make sure each letter and When you press upward on the trigger, your weight will exert a downward force, causing number is correct. -
Page 13: Charger Use
◆ Modification and Repair Warning Battery Removal and Insertion Do not attempt to modify or repair your Himiway A7 Pro unless such actions are Removal explicitly instructed in this user manual. Unauthorized modifications or repairs could - Switch off the e-bike power. -
Page 14: Safety Checklist
The following safety notes provide additional information on the safe operation of your Safety Check Basic Steps Himiway bike and should be closely reviewed. Improper operation, or failure to confirm correct installation, compatibility, and maintenance of any component or accessory may o Test front and rear brakes for proper function. - Page 15 • Always wear an approved bicycle helmet whenever using this product and ensure The following table of contents provides general guidance on Himiway e-bike variable that all helmet manufacturer instructions are used for fit and care of your helmet. power assist settings and their effects on both range and performance. This content will Failure to wear a helmet when riding may result in serious injury or death.
-
Page 16: Battery Charging
Battery Charging ◆ Charging Procedure for Off-bike Charging Step 1: Find the keys located on the handlebar (fig. 3) and remove them. If you cut them ◆ Charging Procedure for On-bike Charging from the handlebars, be careful not to damage any of the wires. Step 1: Check the battery power indicator on your display. - Page 17 NOTICE: Hold the battery while doing the operation, and prevent dropping it during installation and handling. Figure 5 Step 4: Safest way to charge your battery- First, assemble the charger by inserting the plug (Plug 1) into the transformer. Then insert the DC plug (Plug 2) into the battery charging socket. Last, insert the power plug (Plug 3: 110V-240V plug) to the power socket.
- Page 18 • Longer-than-expected charge time • The Himiway Bike can be safely ridden in light rain. However, riding through very • Strange smell, smoke, or liquid emanating from battery and/or charger heavy downpours or through flooded streets is not recommended, as the crank •...
-
Page 19: Riding Modes
◆ Pedal-only In this mode, the Himiway will perform like a normal bike, as you’ll be riding without any assistance from the motor. This mode is especially useful if you run out of battery, or are looking for more intensive resistance training. - Page 20 The kickstand is not designed to hold the bike upright with cargo by itself, always • Make sure to not park, store or transport your Himiway Bike on a rack that is not manually hold the bike upright when loading or carrying cargo.
-
Page 21: Safety And Care Instructions
• • Never use a pressure washer when cleaning your bike. The Himiway Bike can be safely ridden in light rain. However, riding through very • • Never immerse the bike or any components in water, as the electrical system may be heavy downpours or through flooded streets is not recommended, as the crank damaged. -
Page 22: Front Fork Maintenance
After-sales Mail: customers@himiwaybike.com Suggestion Box: mike@himiwaybike.com Himiway has the right, without notice to the consumer, to substitute components of at least equal quality for advertised Himiway e-bike components if those advertised components are unavailable. - Page 24 Long Range E-bike Expert...
Need help?
Do you have a question about the A7 PRO and is the answer not in the manual?
Questions and answers