Customizing The Vertiv™ Liebert® Icom™ Display; Setting General Display Properties; Unit Display Options - Vertiv Liebert iCOM Installer/User Manual

11 Customizing the Vertiv™ Liebert® iCOM™ Display

11.1 Setting General Display Properties

NOTE: You must be logged in to adjust the settings. See
1. Touch
The DISPLAY PROPERTIES panel opens.
2. Touch a value to select the setting from the drop-down list
3. Touch Save to save the property settings.
• Touch Cancel to discard changes.

11.1.1 Unit Display Options

Language
Selects the display language.
Measurement System
Selects the units of measurement. Options are:
• Imperial (°F)
• Metric (°C)
Skin
Selects the color/background format of the user interface. Options are:
• Dark blue
• White
• Dark grey
Backlight Brightness
Selects the brightness of the display back light.
Inactivity Timer
Time to elapse before display locks and dims.
Alarm Buzzer Pattern
Selects or disables the audible alarm notification. See
LED Brightness
Percentage brightness of the display.
Touch Beep
Enable/disable sound when display is touched.
Touch Shockwave
Enable/disable visual shockwave when display is touched.
Turn Unit On/Off Without Password
When enabled, a Power On/Off button displays in the upper-right corner of the iCOM™ main display so personnel can turn the unit on or off without logging in
and accessing the User/Service menus.
11 Customizing the Vertiv™ Liebert®
iCOM™ Display
Powering On the Vertiv™ Liebert® iCOM™ and Logging In/Unlocking Controls
, then > DisplayOptions > > DisplayProperties.
Enabling the Audible Alarm Notification
Proprietary and Confidential ©2024 Vertiv Group Corp.
Liebert® iCOM™ CoolChip Econophase CDU
on page 42
on page 3 .
95