Schedule With Time Picker - D-Link SecuriCam DCS-5300 User Manual

Using IP surveillance Software (continued)

Schedule with Time Picker

Remember to make the Begin Time earlier than the End Time. Otherwise
the Add action will be ignored.
Select period
Once
Every Hour
Every Day
Every Week
After you have made your Begin Time and End Time selections, select a
period. You may want to record only Once, or you may want to record Every
hour, Every day, Every week or Every Month.
When you choose Every Hour, the recording scheduler will be guided only by
the minutes setting. Every hour recording will occur during the minutes that
have been selected. (e.g., if the BeginTime was 2:20pm and the End Time
was 7:40pm then the recording would be in effect from 20 mins past the hour to
40 minutes past the hour for every hour of the day.)
Similarly, if you choose Every day then only the hour and the minute setting will
apply. If you choose Every week then only the day of the week, the hour and
the minute settings are valid. For Every Month, only the date (excluding the
month and year), the hour and the minute are valid settings.
Add selected period
schedule
77
Erase selected
period schedule