D-Link SecuriCam DCS-5300 User Manual page 38

Using the DCS-5300 with an Internet browser
(continued)
Configuration > Advanced > Mail & FTP (Continued)
2nd FTP server -
2nd FTP user name -
2nd FTP password -
2nd FTP remote folder -
Secondary FTP passive
Mode -
Click Apply to make
changes effective
Invalid settings may cause the DCS-5300 to not respond. Change the
configuration settings only if necessary. Consult with your network
administrator or your Internet Service Provider (ISP) if you do not have the
necessary information. If you cannot connect to the camera, refer to page
97 for camera reset and restore factory settings procedures.
The domain name or IP address of the external
FTP server.
Granted user name on the backup FTP server.
Granted password on the backup FTP server.
Granted folder on the backup FTP server.
Passive mode setting for the backup FTP server.
38