Gardena smart system smart Sensor 19040 Operator's Manual page 8

3. Insert the batteries
Make sure that the polarity is correct.
The LED (1) flashes green.
4. Push the battery compartment cover
compartment (6)
5. Slide the lid (4) back onto the sensor.
The inclusion mode has been activated.
6. Make sure that the Connection LED flashes green before
continuing.
7. Follow the instructions in the GARDENA smart App.
If inclusion has failed (no green LED), push the battery compartment cover
for approx. 10 seconds to reset the sensor.
8
(5)
(7)
(6)
(6) into the battery compartment
.
(7)
(5) (4)
(6)
(5) back onto the battery
(1)
.
(5)