Sunrise Medical QUICKIE SEDEO PRO Assembly Instruction Sheet

Please read these instructions carefully before beginning the assembly. Failure to understand and
follow assembly instructions may result in injury to technician and/or end user and may void the
warranty. If you have any questions call Sunrise Medical Technical Support at (800) 333-4000.
If your seat is received with Armrest: See Section 1
If your seat is received without Armrests: See Section 2
SECTION 1: WITH ARMRESTS
C
D
G
Sedeo Pro Semi Recline Gas Spring with Armrest Assembly Parts
(Section 1):
1. 2 ea armrest link (A)
2. 4 ea retaining clip (B)
3. 2 ea M4x10 SHCS Screw (C)
4. 2 ea Internally Threaded
Bolt (D)
A. With armrest: installing armrest link
1. Unfold the backrest, and raise the armrest in order
to install the armrest link (A) with the bushing facing
toward the pins as shown in figure 1.
2. Install the retaining clips (B) onto the pins as shown in
Figure 2 and 3.
3. Repeat steps 1 and 2 to the opposite side of the chair.
1
E F
B
A
5. 2 ea Washer (E)
6. 4 ea Phillips Head Screw (F)
7. 1 ea Left Corner Shroud (G)
8. 1 ea Right Corner Shroud
(H)
A
B
Sunrise Medical 2842 N. Business Park Ave Fresno, CA 93727 USA
Customer service: (800) 333-4000
or visit www.SunriseMedical.com
SEDEO PRO SEMI-RECLINE POWER BACK
SEAT ASSEMBLY INSTRUCTION SHEET
Required tools:
1. 3mm hex key
2. Phillips screwdriver
3. 13mm crescent wrench
4. Torque wrench
H
2
In Canada (800) 263-3390
© 2020 Sunrise Medical (US) LLC
09/2020 251265 Rev. A Page 1of2
3