Sunrise Medical QUICKIE SEDEO PRO Assembly Instruction Sheet

Please read these instructions carefully before beginning the installation. Failure to understand
and follow installation instructions may result in injury to installer and/or end user and may void the
warranty. If you have any questions call Sunrise Medical Technical Support at (800) 333-4000.
Parts:
1. 2 ea armrest link (A)
2. 4 ea retaining clip (B)
3. 1 ea threaded spindle (C)
4. 1 ea M6x10 SHCS (D)
5. 2 ea brass spacer (E)
6. 1 ea washer (F)
7. 2 ea Phillips head screw (G)
8. 1 ea right-hand shroud (H)
A. With armrest: installing armrest link
1. Unfold the backrest, and raise the armrest in order to
install the armrest link (A) with the bushing facing toward
the pins as shown in figure 1.
2. Install the retaining clips (B) onto the pins as shown in
figure 2 and 3.
Required tools:
1. 5mm hex key
2. Phillips screwdriver
3. Torque wrench
With Armrest-
See Sections A-C
Without Armrest-
See Sections D-E
1
A
B
Sunrise Medical 2842 N. Business Park Ave Fresno, CA 93727 USA
Customer service: (800) 333-4000
or visit www.SunriseMedical.com
SEDEO PRO RIGID SEAT ASSEMBLY
INSTRUCTION SHEET
E F
C D
G
B
A
2
In Canada (800) 263-3390
© 2019 Sunrise Medical (US) LLC
11/2019 251263 Rev. A Page 1of3
H
3