Page 2
NH-2010 Handheld Wireless Microphone Parts and functions Cartridge Battery power LED Power switch Battery compartment IR sensor LED Color cap Battery installation & indicator ➔ ➔ ● ○ ○ ● When the microphone is switched ON, the If the LED remains illuminated RED, it means...
Page 3
Instructions Channel synchronizing of the receiver and transmitter Align infrared areas of the receiver and transmitter within 10~30cm. Changing the transmitter’s channel Press the sync button on the receiver. The receiver will transmit the frequency to the transmitter and synchronize the channel. If it doesn’t work check that you have the IR sensor panels aligned, that they are facing each other, devices are within 10~30cm of each other, and try again.
Need help?
Do you have a question about the NH-2010 and is the answer not in the manual?
Questions and answers