Related Manuals for JUSHA JUSHA-C630G
Summary of Contents for JUSHA JUSHA-C630G
- Page 1 Contents JUSHA 6MP Medical Display JUSHA-C630G C630G JUSHA-C630 C630 JUSHA-C620L C620L User Manual...
- Page 2 Hanzhongmen Street, Nanjing City, Jiangsu Province, 210036 China Tel: 0086-25-83305050 Fax: 0086-25-58783273 Free Hotline: 400-820-0556 800-820-0556 Visit us at the website: en.jusha.com.cn © Nanjing Jusha Display Technology Co., Ltd. /All rights reserved /2020. 3060300275 REV:A0 Published by Nanjing Jusha Display Technology Co.,Ltd.
-
Page 3: Table Of Contents
Contents Contents Manual instructions ........................ 1 About this manual ......................1 Explanation of symbols ....................1 Safety information ......................2 Overview ..........................6 Features ......................... 6 Packing list ........................8 Front view and keypad ....................9 Rear view and connection panel ................. 10 Display installation ........................ - Page 4 Contents 7.1 Cleaning .......................... 37 7.2 Disinfection ........................37 8. Malfunction analysis ......................38 9. Declarations ........................... 40 9.1 Legal notice ........................40 9.2 After sale service declaration ..................41 9.3 Proprietary rights ......................42 10. Contact information ......................43...
-
Page 5: Manual Instructions
⚫ For any further questions about this manual, you are welcome to contact Nanjing Jusha Display Technology Co., Ltd. (here in after referred to as JUSHA). 1.2 Explanation of symbols This manual and product may use the symbols below. -
Page 6: Safety Information
Waste Electrical and Electronic Equipment Directive (WEEE) 2002/96/EC Waste disposal should comply with local regulations. Recommend to refer the User Manual Manufacturer information JUSHA trademark Product serial number 1.3 Safety information Warning: Read all the important safety information before installing and operating your display. - Page 7 Manual instructions mixture with air, oxygen or nitrous oxide. ◼ Never expose the display to rain or moisture. Never use the display near water - e.g. near a bathtub, washbasin, swimming pool, kitchen sink, laundry tub or in a wet basement. ◼...
- Page 8 Please contact JUSHA for technical support. ◼ Repairing is limited to trained engineers. Do not try to repair or disassemble the product by yourself.
- Page 9 Manual instructions ◆ Relocate or reorient the device under interference. ◆ Set up curtain appliance between the display and the device under interference. ◆ Plug the display and the device under interference into different power sockets.
-
Page 10: Overview
281.47 trillion colors(65536 grayscale), show image more accurately and smooth and guarantee that everydetail is perfect. ⚫ DICOM compliance Toensure the most accurate and consistent shadings possible, JUSHA measures rigorously and sets every grayscaleon the production line to produce a monitor compliant with DICOM Part 14. - Page 11 GSDF display function of medical image.It also affects the quality of DICOM correction. Jusha unique full screen luminance equalization system SLE, Ensure the uniformity of luminance to meet the requirements of medical...
-
Page 12: Packing List
2.If there is any accessory damage or loss, please contact us. 3.Please only use the original accessories supplied with the display. JUSHA is not responsible for any technical problems caused by using third-part accessories. 4.Please keep the original package. If you need to transport the product, use the original package. -
Page 13: Front View And Keypad
Overview 2.3 Front view and keypad The keys except power key are silkscreen keys.Press any key except power key to bring up the navigation key icons,as shown below. Then if press the key below ,the navigation key icons change,as shown below. -
Page 14: Rear View And Connection Panel
Overview Keypad functions: Key Define Key Icon Function 1. Steady white, the display works normally 2. Slow blinking white, no signal. 3. Steady orange, the display works Power LED abnormally and brings up an OSD alert 4. Dimmed, the display is off Power key To enter sleep mode Exit key... - Page 15 Overview...
- Page 16 Overview Power input DVI-D Dual Link video input Power switch DP(DisplayPort) video input USB1(USB upstream connector) DP(DisplayPort) video output USB2(USB downstream connector) DP(DisplayPort) video input Note: 1. The maximum resolution supported by each signal input interface of the display can be referred to "5.1 technical specifications ". 2.
-
Page 17: Display Installation
Display installation 3 Display installation 3.1 Graphic card installation Note: Before start to install the graphic card, please make sure the computer motherboard supports the PCI Express graphic card and has an empty PCI Express x1 Slot. Carefully read the manual of the motherboard about how to install an expansion card. -
Page 18: Connecting The Cables
Display installation 3.2 Connecting the cables Use the DVI or DP video cables to connect the monitor to the computer host graphic card. The display will automatically complete the selection of video input signal. 1. Through the video cables, put the video interface on the graphics, such as DVI, DP, etc. -
Page 19: Adjusting The Screen Position
Display installation 3.3 Adjusting the screen position You can adjust the height and angle of the display screen, in order to get the most comfortable viewing angle. 3.3.1 Adjusting screen height To move the screen up and down, please hold the screen at both sides and adjust it to an appropriate height. -
Page 20: Adjusting The Tilt And Swivel Angle
Warning: Contact a technician for the installation. JUSHA is not responsible for any damage to the product or harm to customers when the installation is done by the customer. -
Page 21: Multi-Display Configuration
Display installation 3.5 Multi-display configuration Windows OS provides the multi-display feature to allow applications to make use of multiple display devices at the same time.For example, there are two displays used at the same time: one is used to view the medical images for diagnosis, while the other is used to browse the patient medical history. -
Page 22: For Microsoft Windows 7 Operation System
Display installation 3.5.2 For Microsoft Windows 7 operation system 1. The DVI or DP interface on the graphic card is connected to the display corresponding DVI or DP interface by using videocables.(Please see “3.2 connecting the cables” section). 2. Right-clickmouse on the windows desktop blank place, and select the “Screen resolution”on the pop-up menu. -
Page 23: Dual-Screen Settings
Display installation ⚫ Designate which screen is the primary one to display the windows Taskbar and Start menu by selecting the “Make this my main display” check box. Note: The setup method of multi-display extension function in Windows 8/10 is similar to Windows 7. -
Page 24: Display Settings
Display settings 4 Display settings 4.1 First time starting up 1. Open a computer connected to your monitor. Make sure that a display and a graphic card and graphic card driver has been installed correctly. 2. Turn on the power switch, and then touch the power key approximately 1 second, all the key lights are lit up at the same time. -
Page 25: Osd Overview
Display settings 4.3 OSD overview User can change display settings by keypad and OSD (On Screen Display) menu to meet the needs of the working environment. Similarly, the user can also view the basic information and the current settings of the display by using OSD menu. - Page 26 Display settings The following table shows the structure and parameters of the OSD menu in English. Main Menu Submenu Parameter Specification Default Settings Backlight 0-100 DICOM Gamma2.2 Gamma2.4 Left Picture Curve DICOM CT/MRI-JS DICOM Gamma2.2 Gamma2.4 Right Picture Curve DICOM CT/MRI-JS Close Auto...
-
Page 27: Osd Operation
Display settings Factory Reset Temperature BacklightSensor Real-time Information Real-time Update Status Backlight On time Note: This product menu options and specifications are subject to change without prior notice. 4.4 OSD operation 4.4.1 Open OSD Bringing up the OSD menu can be done by: 1. -
Page 28: Change Curve
Display settings 1. Touch any key except power key to bring up the navigation key icon. 2. Touch the menu key to bring up the OSD main menu.By default, the OSD cursor is in the main menu. 3. Touch the confirm key to enter the submenu . -
Page 29: Ambient Brightness Adaptation
Display settings Touch the menu key to bring up the OSD main menu. By default, the OSD cursor is in the main menu. Touch the confirm key to enter the submenu. Touch the key to move the cursor to the "Reading Room" item, and then press the key to enter the "Reading Room"... -
Page 30: Change Input Source
Display settings 1. Touch any key except power key to bring up the navigation key icon. Touch the menu key to bring up the OSD main menu. By default, the OSD cursor is in the main menu. Touch the key to move the cursor to the , then touch the confirm key... -
Page 31: Key Music
Display settings touch the key to enter the "PI" item. 5. Touch the key to turn on or off PI function and touch the key to confirm. 4.4.10 Key Music The display has a key music to be chosen as desired. The operation is as follows: Touch any key except power key to bring up the navigation key icon. -
Page 32: Factory Reset
Display settings 4.4.13 Factory Reset Before delivery, the display has a default and recommended factory settings. User can reset factory settings this function.The operation to reset factory settings is as follows: Touch any key except power key to bring up the navigation key icon. 2. -
Page 33: Feature Function Setting
Display settings 4.5 Feature function setting For the convenience of users, C630G provides shortcuts to quickly call useful special functions. 4.5.1 SmarTouch Touch any key except power key to bring up the navigation key icon. Then touch the key to turn on or off the function of the SmarTouch. Note: The function of the SmarTouch and Ambient brightness cannot be used at the same time. -
Page 34: Important Information
Humidity: 20% - 85% (No condensation) Air pressure: 700hPa - 1060hPa Temperature: -20°C ~ 60°C Transportationand Humidity: 10% - 90%(No condensation) storage Environment Air pressure: 200hPa ~ 1060hPa Certification standards CE,CCC Note: The specifications of JUSHA products are subject to change without notice. -
Page 35: Environmental Information
Important information 5.2 Environmental information All materials of this product are below the limit requirement in RoHS, without toxic or hazardous substances. 5.3 Safety standard This device complies with IEC60601-1:2012 Safety standard EN60601-1:2013 GB4943.1-2011 DIN40050 Protection Level IP20 Compliance disclaimer CE,CCC 5.4 Electromagnetic compatibility 5.4.1 EMC information... - Page 36 Important information analysis ``````````` Important information regarding Electro Magnetic Compatibility (EMC) This electrical medical equipment needs special precautions regarding EMC and put into service according to the EMC information provided in the user manual; The equipmentconforms to this IEC 60601-1-2:2014 standard for both immunity and emissions.
- Page 37 Important information EMS Compliance Table(Table 2-5) Table 2 - Enclosure Port Immunity test levels Basic EMC Phenomenon standard Professional healthcare facility environment Electrostatic IEC 61000-4-2 ±8 kV contact Discharge ±2kV, ±4kV, ±8kV, ±15kV air Radiated RF EM 3V/m IEC 61000-4-3 field 80MHz-2.7GHz 80% AM at 1kHz...
-
Page 38: Emi Information
Important information analysis ``````````` Table 4– Input a.c. power Port Immunity test levels Basic EMC Phenomenon standard Professional healthcare facility environment Electrical fast ±2 kV IEC 61000-4-4 transients/burst 100kHz repetition frequency Surges IEC 61000-4-5 ±0.5 kV, ±1 kV Line-to-line Surges IEC 61000-4-5 ±0.5 kV, ±1 kV, ±2 kV Line-to-ground... -
Page 39: Maintenance
Maintenance 6. Maintenance ⚫ Avoid screen over-heat Please use the display in the recommended environment, including appropriate temperature, humidity and air pressure. Turn off the display or lower its luminance if not use, or it may cause over-heat damage. In addition, if the screen displays the same image for a long time, it may over-heat and cause damage to some pixels. - Page 40 Maintenance ``````````` Some chemicalcleanser may damage the screen and case of the display. We recommend you touse non-ammonia and non-alcohol based cleanser. We are not liable for damage resulting from ammonia or alcohol based cleanser. ⚫ Avoid shock and vibration The LCD screen is quite fragile, so avoid strong shock and vibration.
-
Page 41: Cleaning And Disinfection
JUSHA does not recommend the use of any ammonia or alcohol-based cleaners on the monitor screen or case. Some chemical cleaners have been reported to damage the screen and/or case of the monitor. JUSHA will not be liable for damage resulting from use of any ammonia or alcohol based cleaners. -
Page 42: Malfunction Analysis
Please contact us if failed to resolve problem after reading the recommended solutions followed. To solve the problem, please contact Nanjing Jusha Display Technology Co., Ltd after-sales service or read the manual to find proper solutions. If you use the recommend below solution still can't solve the problem, please contact Nanjing Jusha Display Technology Co., Ltd. - Page 43 Malfunction analysis 1.Connection problem of power wire or signal wire Snowflake on screen 2.Main board static electricity or dust affection the connection of graphic card. 1.Connection problem of power wire or signal wire No figure after displaying well for a while 2.Main board static electricity or dust affection the connection of graphic card.
-
Page 44: Declarations
JUSHA hereby explicitly rejects all warranties and state of any kind, any property or extent whether statutory, express or it leads to any laws ,rules, commercial practice, conventions or trade disputes etc. -
Page 45: After Sale Service Declaration
JUSHA keeps patents, copyright and its exclusive right and all information in this manual including JUSHA all designs and related materials. Anyone cannot plagiarize JUSHA design or copy its product to sell or use without the company’s explicit authority. 9.2 After sale service declaration The after-sale warranty is three years from the date of purchase, only if the product has been used with the recommended brightness. -
Page 46: Proprietary Rights
9.3 Proprietary rights Nanjing Jusha Display Technology Co., Ltd keeps the copyright of this manual and other related ownership. It is not allowed to copy, use or sell this manual without authorization of Nanjing Jusha Display Technology Co.,... -
Page 47: Contact Information
Contact information 10. Contact information Nanjing Jusha Display Technology Co., Ltd. Address: 8A, Block 1, Nanjing International Service Outsourcing Mansion, No.301 Hanzhongmen Street, Nanjing City, Jiangsu Province, 210036 China Tel: 0086-25-83305050 Fax: 0086-25-58783273 Free Hotline: 400-820-0556 800-820-0556 Web: en.jusha.com.cn...
Need help?
Do you have a question about the JUSHA-C630G and is the answer not in the manual?
Questions and answers