Graphic Equalizer; Dsp Surround System - Aiwa CX-NA71 Operating Instructions Manual

GRAPHIC EQUALIZER
DSP SURROUND SYSTEIM
GEQ
This unit provides the following three different equalization curves.
ROCK: Powerful sound emphasizing treble and bass
POP: More presence in the vocals and midrange
CLASSIC: Enriched sound with heavy bass and fine treble
Press the GEQ button repeatedly until the desired
equalization curve is displayed.
ROCK /POP / CLASSIC
To cancel the selected mode
Press the GEQ button repeatedly so that GEQ OFF appears on
the display.
Using the headphones
Connect headphones to the PHONES jack with a stereo standard
plug (06.3 mm,
'/4
inch).
No sound is output from the speakers while the headphones are
plugged in,
Sound adjustment during recording
The output volume and tone (except BBE) of the speakers or
headphones may be freely varied without affecting the level of
the recording.
The DSP (Digital Signal Processor) surround system can recreate
the effect of sounds reflected from walls or ceilllngs. This system
enhances 3 types of sound presence.
DISCO: Sound presence of a disco
LIVE: Sound presence of a live music performance
HALL: Sound presence of a concert hall
Press the SURROUND button repeatedly until the desired
SURROUND mode is displayed.
DISCO / LIVE/ HALL
Equalization curves are selected automatically to match the
SURROUND modes and can also be selected or turned off to
suit your preference.
When the music source is monaural
Select LIVE to obtain a simulated stereo effect. When DISCO or
HALL is selected, no sound will be Iheard from the surround
speakers.
To cancel the selected mode
Press the SURROUND button repeatedly so that SUR OFF
appears on the display.
While SURROLJND mode is off, no sound is
surround speakers.
When the MIC or ECHO level is changecl
SURROUND mode is automatically canceled,
heard from the
(page 19), the
m
When playing back a tape recorded with BBE, it is recommended
that BBE be set to off to avoid distorted high frequency sound.
ENGLISH 8