Spectrum Industries 55228 Assembly Instructions

Assembly Instructions
Before you begin, read and comply with all safety and operating instructions,
and ensure all parts and correct quantities are included.
Any parts damaged during shipment must be reported within 5 days of receipt.
To report information regarding missing parts or damage, to purchase parts or
accessories, or if you have any questions, please contact us.
www.spectrumfurniture.com
800-235-1262, 715-723-6750
Thank you for purchasing Spectrum products!
(2) 0119430
Top / Bottom Panel
(2) 0119438
1"W x 15.5"L Polyethylene
slide with (S1101) 3/4"
double-sided tape
(16) 0100167
8-32 x 1/2" PH
thread-cutting screw
1
Assemble cube
1. Assemble the cube top, bottom, and four rack rails using (16)
8-32 x 1/2" PH thread-cutting screws. Note the orientation of the
rails. Figure 1.
2. Tighten screws securely.
Rack rail Top
(4 required) panel
8-32 x 1/2" PH
thread-cutting screw
(16 required)
Important
(4) 052436
Rack rail (21")
Bottom
panel
12RU Rack Cube for Edge Lectern
2
Apply slides
1. Apply the polyethylene slides to the bottom panel as shown.
Figure 2.
Figure 1
55228
Bottom
panel
Polyethylene
slides
0191408R1 Page 1 of 2
Figure 2