Spectrum Industries 55499 Assembly Instructions

Assembly Instructions Assembly Instructions
Important
Before you begin, read and comply with all safety and operating instructions,
and ensure all parts and correct quantities are included.
Any parts damaged during shipment must be reported within 5 days of receipt.
To report information regarding missing parts or damage, to purchase parts
or accessories, or if you have any questions, please contact us.
www.spectrumfurniture.com
800-235-1262, 715-723-6750
Thank you for purchasing Spectrum products!
(4) 026301
1"x1" Endcap

1. Display stand prep

1. If your stand currently has a monitor mount installed, remove the
(4) 1/4-20 x 40mm JC bolts securing it to the stand. Figure 1.
Retain the monitor mount plate and JC bolts-they will be used in
step 3.
(1) 0119747
Monitor mount
Dual Display Stand for AV Credenza
• Accommodates two monitors up to 42"
• Adjustable left-to-right
• Requires Display Stand 55498
(2) 0146050
Dual Monitor
Mount Tube
Note: The display stand panel should be fully assembled and attached
to the credenza before proceeding with 55499 assembly. Be sure your
ceiling height provides enough clearance for the installed monitors.
(4) 053310
1/4-20 x 40mm
JC bolt
(4) 052605
1/4-20 x 15mm
JC bolt
55499
Note: Be sure the display
stand wall brackets are in
place and securely anchored
to studs before assembly.
1/4-20 x 40mm
JC bolts
(4 required)
D i s
p l a
y s
t a n
d p
a n e
l
4mm
Monitor
mount plate
Figure 1
0191543 Page 1 of 2