Brainz XXL Instruction Manual

BRAINZ KARAOKE SPEAKER XXL
PLEASE READ THE INSTRUCTIONS CAREFULLY
What you need
•
DC5V/USB Cable (included)
•
USB Adapter or USB Power Supply (not included)
•
Mobile phone, tablet or laptop with Bluetooth and Qi support (not included)
•
TF/SD Card (optional, not included)
How to charge the karaoke speaker
Connect the included USB-C cable to the back of the karaoke speaker and connect it to a power source. The
speaker will make a sound as soon as it is connected to the power source. The top of the speaker shows how full it
is.
You also charge the microphones with the USB-C cable. Once the microphones are charged, the red light turns off.
How to set up the device
Make sure the speaker is fully charged before using it. Turn the speaker on by flipping the slider on the back. The
speaker will appear under the new Bluetooth connections on your device as 'BRAINZ S150'. Clicking on this will
connect your device and the speaker will be ready to use. The speaker will let you know if your device is connected
by sound. If you want to pair another device, press the button on the bottom left. The speaker will make a sound and
the new device can be paired.
Next, pair the microphones to the speaker. You do this by pressing and holding the 'power' button for 3 seconds.
The microphones will automatically connect to the speaker.
Volume
To change the volume, use the middle rotary knob on the top of the speaker. Turn the knob to the right to increase
the volume. Turn the knob to the left to lower the volume.
Pausing music
Click the 'Play' button to pause the music. Repeat to resume the music.
Next/previous song
Press the 'Next' button to go to the next song. Press the 'Skip' button to go to the previous song or play the current
song from the beginning.
Audio settings
The left and right rotary knobs can be used to change the audio settings. The left knob can be used to increase (turn
right) or decrease (turn left) the bass.
The right knob can make the music sound brighter (turn right) or more muted (turn left).
Change mode
Press the 'Mode' button to switch from bluetooth to USB or TF/SD.
USB
The USB port allows you to play your own music. Insert a USB stick into the karaoke Speaker's dedicated access
port.
TF/SD
It is possible to play music using your own SD card. Insert your SD card into the 'TF' port.
LED illumination
Click the 'Orig' button to change the LED lighting. Press and hold this button to turn off the LED illumination. Repeat
to turn the LED lighting on again.
INSTRUCTION MANUAL
AND KEEP THEM FOR FUTURE REFERENCE
EN