Brainz X-MAS Ball Speaker Instruction Manual

BRAINZ X-MAS BALL SPEAKER
PLEASE READ THE INSTRUCTIONS CAREFULLY
AND KEEP THEM FOR FUTURE REFERENCE

What you need

•
USB-C cable (included)
•
Mobile phone with Bluetooth (not included)

How to charge the X-Mas Ball Speaker

Connect the supplied USB-C cable to the speaker and connect the USB side to a power source. The speaker will
now charge.

Switching on

Press and hold the round button on the back of the X-mas Ball Speaker for 3 seconds. The speaker is now
switched on.

Music type

After turning on the X-Mass Ball Speaker, you will first hear a pre-programmed music track. Press the button on
the back of the speaker once to enable the Bluetooth function. The speaker will appear under your new Bluetooth
connections on your phone as Brainz Speaker S85. By clicking on it, your phone will connect and the speaker is
ready for use.

Built-in music

Besides Bluetooth, this speaker also has 8 built-in Christmas carols. These songs play one after the other and
cannot be controlled with next/ previous.

Switch off

Press and hold the round button on the back of the X-mas Ball Speaker for 3 seconds. The speaker is now
switched off.

Please note:

Do not use a charger with a higher voltage than suitable for this product.
Please note:
This product is not dishwasher safe. Clean item with a damp cloth.
For more information about this product, please visit
EN
INSTRUCTION MANUAL
This manual is valid for article number 38583 & 38584.
www.brainz-electronics.nl