convenience concepts 157075 Assembly Instructions

3 tier display glass entryway

Download this manual

3 Tier Display Glass Entryway

ASSEMBLY INSTRUCTIONS

We have designed our furniture with you , the customer in mind . Our clear , easy to follow ,

step by step instructions will guide you through the project from start to finish .

Feel confident that this will be a fun and rewarding project . The final product will be a quality

piece of furniture that will go together smoothly and give years of enjoyment .

Please do not return to the store

STOP

. Broken or missing parts?

. Need help with assembly?

If you have any questions just call 1-800-468-6447 or email us at

parts@convenience-concepts.com

157075

Need help?

Do you have a question about the 157075 and is the answer not in the manual?

Page 1 3 Tier Display Glass Entryway 157075 ASSEMBLY INSTRUCTIONS We have designed our furniture with you , the customer in mind . Our clear , easy to follow , step by step instructions will guide you through the project from start to finish .
Page 2 Hardware List Cap ( 4pcs ) Plastic Feet (4pcs ) ( 1pcs ) ( 3pcs ) Long Pole Middle Pole 　 ( 3pcs ) Short Pole ( 2 pcs ) ( 1pcs ) Ｇlass Panel Half Ｇlass Panel Eyelet Screw ( 2pcs ) ( 2pcs ) ( 2pcs ) Expansion Pipe...
Page 3 Step 1 1.Put on top of plastic feets glass panel 2.Gently screw long pole and middle poles into plastic feets using care not to over tighten . Long Pole x1 Middle Pole x3 Ｇlass Panel x1 Ｂ Plastic Feet x4 Ｂ...
Page 4 Step 3 1.Place top onto poles glass panel 2.Screw caps onto unit and enjoy. Ｇlass Panel x1 Step 4 1.Drill hole slightly smaller than anchor into drywall and gently into hole. tap anchor Insert eyelet screw into anchor and fasten unit to wall Expansion Pipe using cable tie.