Advertisement
Advertisement
Table of Contents
Related Manuals for HIKVISION 0500TF Series
Summary of Contents for HIKVISION 0500TF Series
- Page 1 Gigabit Switch Quick Start Guide UD36167B...
-
Page 2: Applicable Models
Preface Applicable Models This manual is applicable to 0500TF series gigabit switches. Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Provides additional information to emphasize or supplement important points of the main text. -
Page 3: Product Introduction
1 Introduction 1.1 Product Introduction 0500TF series switches are unmanaged gigabit network switches, providing multiple gigabit Ethernet ports to upload data via convergence switches. The devices are reliable, easy to install and maintain, and equipped with rapid switching functions. With multiple access ports, the devices are applicable for access of small- scale LAN devices. -
Page 4: Installation
Indicator/Port Description ● Unlit: No power supply is connected or power supply is abnormal. ● Solid on: The port is connected. ● Flashing: The port is transmitting Port Status data. ② Indicator ● Unlit: The port is disconnected or connection is abnormal. Gigabit RJ45 Used for connection to another ③... - Page 5 3. Fix two self-prepared M5 or M6 nuts to the rear side of the rack on both sides respectively. Fix Nuts to the Rack 4. Place the switch against the rack so that the holes on the L- shaped brackets are aligned with the holes where the nuts have been fixed.
- Page 6 Steps 1. Connect one end of the grounding cable to the binding post on the grounding bar. 2. Connect the other end of the grounding cable to the grounding terminal of the device and tighten the screw. Grounding with Grounding Bar 3.1.2 Without Grounding Bar If there is no grounding bar but the earth is nearby and the grounding body is allowed to be buried, follow the steps below.
- Page 7 3.3 Connect Fiber Optical Port If the device has a fiber optical port, connect the device to a peer device through an optical fiber connecting optical modules plugged into fiber optical ports respectively. Steps Caution Single-mode optical modules need to be paired for use. ●...
Need help?
Do you have a question about the 0500TF Series and is the answer not in the manual?
Questions and answers