Sharp CD-RW5000 Operation Manual page 31

Recording to a CD-R/CD-RW (continued)
Programmed recording from CDs
Programmed play lets you select the desired discs and tracks.
1
Program the desired tracks from CD(s). (See page 20.)
2
Load the CD-R or CD-RW disc. (See page 28.)
3
Press the CD CDR button to start recording.
(Perform steps 8 - 9 on page 29.)
When the CD reaches the end, recording will stop.
While tracks are programmed, the REC MODE and TRACK EDIT buttons do
not work. (See pages 28 and 30.)
To stop recording:
Press the button.
The programmed content will not be erased when the recording is stopped.
Recording from the radio
1
Tune into the desired station. (See page 23.)
2
Load the CD-R or CD-RW disc. (See page 28.)
3
Press the CDR REC button.
4
After "PRESS PLAY" appears, press the 06
cording.
To mark track numbers while recording from the radio:
Press the CDR REC button during recording. It will be marked and the track number
will be increased by one.
To stop recording:
Press the button.
*RW5000_P27_37(CD-R) 31
Recording from cassettes
Recording starts automatically when the cassette is played.
1
Load the cassette. (See page 22.)
2
Load the CD-R or CD-RW disc. (See page 28.)
3
Press the REC MODE button.
S. SYNC REC: When sound signal is input after pressing the 06 button,
MANUAL REC: After pressing the 06 button, recording will start.
Select one of the above recording types using the jog dial. Then, press the
ENTER button.
4
If you have selected "MANUAL REC", you can turn on or off it
using the AUTO MARKER button. (When you have selected
"S.SYNC REC", auto mark function will be turned on and no
switching operation is possible.)
A. MARK ON: Marks track numbers when sound stops for 3 seconds or longer.
A. MARK OFF: Does not mark track numbers.
The auto mark function may not work correctly if you record a tape with much noise.
5
Press the CDR REC button.
06 button to start re-
06 06
06
6
After "PRESS PLAY" appears, press the 06
cording.
If the tape or CD-R or CD-RW disc stops, recording will stop.
To stop recording:
Press the
recording will start automatically.
06 button to start re-
06 06 06
button.
00.7.14, 3:51 PM
31