Sharp CD-RW5000 Operation Manual page 21

Advanced CD playback (continued)
Repeat or Random play
1
Press the PLAY MODE button repeatedly to select the playback
mode.
Repeat playback mode
2
Press the 06 06 or one of the DISC 1 - DISC 6 buttons to start play-
06 06
06
back.
or
If playback is started by pressing the 06 button, repeat or random play will
be performed on all discs.
If playback is started by pressing one of the DISC 1 - DISC 6 buttons, repeat
or random play will be performed on that disc.
To repeat a programmed sequence:
Perform steps 1 - 6 in the "Programmed play" section and then select the repeat play-
back.
Notes:
After using repeat or random play, be sure to press the
Otherwise, the disc(s) will play continuously.
In random play, the CD player will select and play tracks automatically.
(You cannot select the order of the tracks.)
To cancel repeat or random play:
Press the PLAY MODE button repeatedly to select the normal play mode.
*RW5000_P18_24(Playback) 21
Random playback mode
Normal playback mode
button.
Switching the time display
Each time the TIME button on the remote control is pressed during playback
or in the pause mode, the display will change.
The elapsed playing time for the
current track will be displayed.
The remaining playing time for the
current track will be displayed.
The total remaining playing time
for the disc will be displayed.
Notes:
During random play, the total remaining playing time will not be displayed.
Depending on the CD, the playing time display may not match the total playing time
which is indicated on the CD jacket, as the time between tracks is not included.
00.7.13, 3:14 PM
21