Graco LineLazer V 200HS Operation
  1. Manuals
  2. Brands
  3. Graco Manuals
  4. Paint Sprayer
  5. LineLazer V 200HS
  6. Operation
Graco LineLazer V 200HS Operation

Graco LineLazer V 200HS Operation

Standard series and high production (hp) series airless line stripers
Hide thumbs Also See for LineLazer V 200HS:

Advertisement

Table of Contents

Operation
™
LineLazer
V 200
Standard Series and High Production (HP) Series
For the application of line striping materials.
For professional use only.
For outdoor use only.
Not for use in explosive atmospheres or hazardous locations.
Maximum Operating Pressure: 3300 psi (22.8 MPa, 228 bar)
Important Safety Instructions
Read all warnings and instructions in this manual and in related manuals before using the equipment.
Be familiar with the controls and the proper usage of the equipment.
Save these instructions.
Related Manuals:
3A3390
Parts
311254
Gun
LineLazer V 200
Standard Series
Use only genuine Graco replacement parts.
The use of non-Graco replacement parts may void warranty.
& 200
HS
DC
309277
Pump
3A3428
Auto-Layout Applications Methods
HS
Airless Line Stripers
LineLazer V 200
High Production Series
3A3426H
LineLazer V 200
HS
EN
DC

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LineLazer V 200HS and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Graco LineLazer V 200HS

Summary of Contents for Graco LineLazer V 200HS

  • Page 1 Related Manuals: 3A3390 Parts 309277 Pump 311254 3A3428 Auto-Layout Applications Methods LineLazer V 200 Standard Series LineLazer V 200 LineLazer V 200 High Production Series Use only genuine Graco replacement parts. The use of non-Graco replacement parts may void warranty.
  • Page 2 Standard Series ......26 Graco Information ......70 Initial Setup (Standard Series) .
  • Page 3 Cleanup Cleanup 4. Clean filter, guard and SwitchTip in flushing fluid. This equipment stays pressurized until pressure is manually relieved. To help prevent serious injury from pressurized fluid, such as skin injection, splashing fluid TI3375A and moving parts, follow the Pressure Relief FLUSH Procedure when you stop spraying and before 5.

  • Page 4: Standard Series

    Cleanup Standard Series 3A3426HOperation...

  • Page 5: Linelazer V Livelook Display

    LineLazer V LiveLook Display LineLazer V LiveLook Display Standard Series 9-10 9-10 3A3426HOperation...

  • Page 6: Initial Setup (Standard Series)

    LineLazer V LiveLook Display Initial Setup (Standard Series) US Units Pressure = psi The initial setup prepares the striper for operation based Volume = gallons on a number of user entered parameters. Language Distance = feet selections and the units of measure selections can be Line Thickness = mil set before you start or changed later.
  • Page 7 LineLazer V LiveLook Display 3. Press to select Setup/Information. 6. Push to start calibration. ti27826a 7. Move striper forward. Keep unit aligned with steel tape. 8. Stop when chosen part of unit aligns with 26-ft (8m), or distance entered, on steel tape (25-ft./ 7.6m ti27827a distance).

  • Page 8: Striping Mode (Standard Series)

    LineLazer V LiveLook Display Striping Mode (Standard Series) 200DC 200H ti27889a Operating in Striping Mode Ref. Description 1. Make sure engine is running. Resets Distance, Gallons, Mils Job logging 2. Set pump switch to ON. Scroll between menu screens Line width adjustment buttons Auto gun buttons MIL thickness.

  • Page 9: Measure Mode (Standard Series)

    LineLazer V LiveLook Display Measure Mode (Standard Series) 2. Press and release . Move striper forwards or backwards. (Moving backwards is a negative Measure Mode replaces a tape measure to measure distance.) distances when laying out an area to be striped. 1.
  • Page 10 LineLazer V LiveLook Display Setup/Information to select Setup/Information. Press to select Language. See Language, page 27. See Calibration, page 27. See Settings, page 32. See Information, page 33. 3A3426HOperation...
  • Page 11 LineLazer V LiveLook Display Settings to select Setup/Information. Press open Settings Menu. Chooses the machine type. Necessary for accurate gallon counting. to set time and date. Set units with to adjust screen contrast to the desired value. ti27839b 3A3426HOperation...
  • Page 12 LineLazer V LiveLook Display Information to select Setup/Information. Press open Information Menu. Displays and logs life data and striper information. View and test functionality of components. Stroke Counter Touch Pad Buttons Pressure Transducer Engine Voltage Distance Sensor Battery Voltage Logs last four error codes that occurred. Code Description 02 = Over pressure 03 = No transducer detected...

This manual is also suitable for:

Linelazer v 200dc

Table of Contents