03
Connecting your equipment
Connecting an iPod
This receiver has a dedicated iPod terminal that will allow
you to control playback of audio content from your iPod
using the controls of this receiver.
•
Switch the receiver into standby then use the
supplied iPod cable to connect your iPod to the iPod/
iPhone/USB terminal on the front panel of this
receiver.
• It is also possible to connect using the cable included
with the iPod, but in this case it is not possible to view
pictures via the receiver.
• For the cable connection, also refer to the operating
instructions for your iPod.
• For instructions on playing the iPod, see Playing an
iPod on page 39.
CONTROL
MCACC SETUP MIC
iPod cable
(supplied)
Note
1 This receiver does not support a USB hub.
32
En
ON / OFF
VIDEO CAMERA
iPod
iPhone
USB
HDMI 5
MENU
iPod
Connecting a USB device
It is possible to play audio and photo files by connecting
USB devices to this receiver. It is also possible to connect
a USB keyboard (US-international layout) to the receiver
to enter text in the following GUI screens.
• Change the input name in the Input Setup menu
(page 37).
• Add names to radio station presets (page 43).
• Enter Internet radio station URLs (page 44).
•
Switch the receiver into standby then connect your
USB device to the USB terminal on the front panel of
this receiver.
• For instructions on playing the USB device, see
Playing a USB device on page 40.
MASTER
VOLUME
MCACC SETUP MIC
USB mass
storage device
1
CONTROL
ON / OFF
VIDEO CAMERA
iPod
iPhone
USB
HDMI 5
USB keyboard
MASTER
VOLUME