Basic Setup; Switching The Speaker Impedance; Changing The Osd Display Language (Osd Language); Automatically Conducting Optimum Sound Tuning - Pioneer VSX-1120-K Operating Instructions Manual

Basic Setup

Chapter 4:
Basic Setup

Switching the speaker impedance

We recommend using speakers of 8 Ω with this system,
but it is possible to switch the impedance setting if you
plan to use speakers with a 6 Ω impedance rating.
1 Switch the receiver into standby.
2 While holding down ENTER on the front panel,
press  STANDBY/ON.
The display shows RESET  NO .
Use TUNE / (or / on the remote control) to select
SPEAKER  8Ω , and then use PRESET / (or /
 on the remote control) to select SPEAKER 8Ω or
SPEAKER 6Ω.
• SPEAKER 8Ω – Use this setting if your speakers are
rated at 8 Ω or more.
• SPEAKER 6Ω – Use this setting if your speakers are
rated at 6 Ω.
Changing the OSD display language
(OSD Language)
The language used on the Graphical User Interface
screen can be changed.
• The explanations in these operating instructions are
for when English is selected for the GUI screen.
1 Switch on the receiver and your TV.
Make sure that the TV's video input is set to this receiver
(for example, if you connected this receiver to the VIDEO
jacks on your TV, make sure that the VIDEO input is now
selected).
RECEIVER
2 Press on the remote control, then press
HOME MENU.
A Graphical User Interface (GUI) screen appears on your
TV. Use /// and ENTER to navigate through the
screens and select menu items. Press RETURN to exit
the current menu.
3 Select 'System Setup' from the Home Menu.
4 Select 'OSD Language' from the System Setup
menu.
5 Select the desired language.
6 Select 'OK' to change the language.
The setting is completed and the System Setup menu
reappears automatically.
Automatically conducting optimum
sound tuning (Auto MCACC)
The Auto MCACC Setup measures the acoustic
characteristics of your listening area, taking into account
ambient noise, speaker connection and speaker size, and
tests for both channel delay and channel level. After you
have set up the microphone provided with your system,
the receiver uses the information from a series of test
tones to optimize the speaker settings and equalization
for your particular room.
Important
• Make sure the microphone and speakers are not
moved during the Auto MCACC Setup.
• Using the Auto MCACC Setup will overwrite any
existing settings for the MCACC preset you select.
• Before using the Auto MCACC Setup, the
headphones should be disconnected.
CAUTION
• The test tones used in the Auto MCACC Setup are
output at high volume.
®
THX
• THX is a trademark of THX Ltd., which may be
registered in some jurisdictions. All rights reserved.
1 Switch on the receiver and your TV.
Make sure that the TV's video input is set to this receiver.
2 Connect the microphone to the MCACC SETUP MIC
jack on the front panel.
Make sure there are no obstacles between the speakers
and the microphone.
CONTROL ON / OFF
iPod
iPhone
USB
MCACC SETUP MIC
MASTER
VOLUME
VIDEO CAMERA
HDMI 5
Microphone
Tripod
04
35
En