Sunlighten SIGNATURE III Assembly Instructions Manual
Hide thumbs
Also See for SIGNATURE III:
- Assembly instructions manual (6 pages) ,
- Assembly instructions (5 pages) ,
- Owner's manual (20 pages)
Related Manuals for Sunlighten SIGNATURE III
Summary of Contents for Sunlighten SIGNATURE III
- Page 1 US ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS SIGNATURE III Bench Floor Roof Left Wall Back Wall Right Wall Front Wall with Glass door sunlighten.com sunlighten.com...
- Page 2 Place the back wall on the back of the floor panel . Be sure you have two people assisting with this step. This is the side with the sauna information label on the bottom edge. sunlighten.com sunlighten.com...
- Page 3 As you insert each wall segment, you will insert the U-clips in the pre-drilled holes in the corner. This will keep the walls sealed together. The front wall will be inserted next. Be careful of the glass door and panel as you insert the wall. sunlighten.com sunlighten.com...
- Page 4 STEP 6 Once all the U-clips have been inserted in the corners, the next step will be to place the roof on top. Make sure the side the main power cord receptacle faces the back. sunlighten.com sunlighten.com...
- Page 5 (see illustration 7.2). NOTE: Before the bench is placed, make sure the heater frames are taken out to allow the bench to be placed on its support. Then install the bench Left and then replace heater frames. Front sunlighten.com...
- Page 6 A second person should hold the handle while the other screws the bolts in with the Allen wrench. heater frame CONGRATULATIONS, your sauna is now ready to enjoy! If you have any questions, please call Sunlighten Customer Support at 877.292.0020. sunlighten.com sunlighten.com...
Need help?
Do you have a question about the SIGNATURE III and is the answer not in the manual?
Questions and answers