Page 1
SIGNATURE IV ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS Floor Roof Left Wall with Glass Door Back Wall Right Wall Front Wall with Glass door secure plates before assembly - see STEP 3. sunlighten.com.au sunlighten.com.au...
Page 2
STEP 2 Place the back wall on the back of the floor panel • Be sure you have two people assisting with this step. • This is the side with the sauna information label on the bottom edge. sunlighten.com.au sunlighten.com.au...
Page 3
Using the labeled bolt and Allen wrench, insert • the support once the wall has been placed and a U-clip installed in the top corner of the left and back wall. sunlighten.com.au sunlighten.com.au...
Page 4
Once all the U-clips have been inserted in the corners, • the next step will be to place the roof on top without roof cover panels. Make sure the side the main powercord • receptacle faces the back. sunlighten.com.au sunlighten.com.au...
Page 5
Allen wrench. The dust cover should also be replaced. • heater frame CONGRATULATIONS your sauna is now ready to enjoy! If you have any queries please call Sunlighten Customer Support at 1800 786 544. sunlighten.com.au sunlighten.com.au...
Need help?
Do you have a question about the SIGNATURE IV and is the answer not in the manual?
Questions and answers