Page 1
UK ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS SIGNATURE IV Floor Roof Left Wall with Glass Panel Back Wall Right Wall Front Wall with Glass door secure plates before assembly - see STEP 3. sunlighten.com.au sunlighten.com/gb-en...
Page 2
Place the front wall on the front of the floor panel . Be sure you have two people assisting with this step. Be careful of the glass door as you install the wall. sunlighten.com.au sunlighten.com/gb-en...
Page 3
. Using the labeled bolt and Allen wrench, insert the support once the wall has been placed and a U-clip installed in the top corner of the left and back wall. sunlighten.com.au sunlighten.com/gb-en...
Page 4
STEP 6 Once all the U-clips have been inserted in the corners, the next step will be to place the roof on top. Make sure the side the main power cord receptacle faces the back. sunlighten.com.au sunlighten.com/gb-en...
Page 5
The large bench piece will be inserted on the back wall, while the smaller Left bench will be inserted last, on the right wall Front support. sunlighten.com.au sunlighten.com/gb-en...
Page 6
A second person should hold the handle while the other screws the bolts in with the Allen wrench. heater frame CONGRATULATIONS, your sauna is now ready to enjoy! If you have any queries, please call Sunlighten Customer Support at 0330.808.1203. sunlighten.com.au...
Need help?
Do you have a question about the SIGNATURE IV and is the answer not in the manual?
Questions and answers