Remote Control - Marantz PM6004 Owner's Manual

Remote control

You can use the supplied remote control to operate this unit and
marantz audio components such as CD players, tuners, DVD players,
q
and tape decks. See "Operating marantz audio components"(vpage
5).
q
POWER ON/STANDBY buttons ··············································· (8)
w
• POWER ON button
• POWER OFF button
• SOURCE POWER button
e
You can press this button to switch the mode of marantz audio
components (provided with a power standby function) between
power-on and standby.
t
w
SOURCE DIRECT button ··························································· (9)
e Input selector buttons ······························································ (5)
r
INPUT d/f buttons ··································································· (9)
y
r
t
Component operating buttons
y
VOLUME adjustment buttons ·············································· (8, 9)
• MUTE Button
• VOLUME + / – Button
n Operating marantz audio components
Operation
t
1 Press the corresponding
component for selecting the input source to be used in playback
and recording.
• The remote control operation is switched to operation mode of the
selected input source.
• This unit's function will be switched accordingly.
2 Operate the audio component.
• See the table on the right for the buttons you can use.
• The remote control e Input selector buttons are used to select the
input source for this unit and switch the remote control operation
mode at the same time.
• You can operate the remote control of this unit regardless of the
remote control mode setting.
• To use the remote control correctly, also refer to the operating
instructions of other components.
NOTE
Some input terminals of this unit and corresponding input selector
buttons on the remote control have different names, as shown below.
e Input selector button of the audio
Remote control buttons The unit input terminals
AUX, DVD AUX/DVD
CD-R RECORDER1
TAPE, MD RECORDER2
n CD operation n DVD operation
Operation
Function
buttons
8 9
Cue
8 9
Stop
2
1 Playback
3 Pause
0 – 9 Track selection
d f 0 1
T.MODE
Sound mode selection
n Tuner operation
(TUNER)
n Cassette deck operation
Operation
Function
buttons
P.SCAN/A.TUNE preset scan
d/TUNE+ Tuning up
Tuning down
f/TUNE–
Preset channel
0/PRESET–
selection
Preset channel
1/PRESET+
selection
BAND FM/AM switching
0 – 9 Enter number
Clear memory
CLEAR
or input data
Save preset
MEMO
station number
Direct frequency
F.DIRECT
tuning
Auto stereo/
T.MODE
monaural switching
• The remote control buttons may
not function properly for some
marantz tuners.
ENGLISH
Part names and functions
Operation
Function
buttons
Cue
2 Stop
Playback
1
3 Pause
MENU Menu
Cursor operation
ENTER
Enter setting
0 – 9 Enter number
Display disc
DISPLAY
information
(TAPE)
Operation
Function
buttons
Fast-rewind
8
9 Fast-forward
2 Stop
Playback
1
3 Pause
CLEAR Counter reset
5