Table of Contents
Advertisement
Quick Links
A0279IVZ.fm
KGS 255
Betriebsanleitung . . . . . . . . . . . . . . . . . . . . .3
Operating Instruction . . . . . . . . . . . . . . . . .14
Instructions d'utilisation . . . . . . . . . . . . . . .25
Handleiding . . . . . . . . . . . . . . . . . . . . . . . .37
Manuale d'istruzioni . . . . . . . . . . . . . . . . . .49
Advertisement
Table of Contents
Related Manuals for Elektra Beckum KGS 255
Summary of Contents for Elektra Beckum KGS 255
- Page 1 A0279IVZ.fm KGS 255 Betriebsanleitung .....3 Operating Instruction ....14 Instructions d'utilisation .
- Page 2 * prEN 61029-2-9 (07.2002), DIN EN 61000-3-2, DIN EN 61000-3-3, DIN EN 55014-1, DIN EN 55014-2, EN ISO 3744, DIN EN 62079 ** 98/37/EG - 73/23/EG - 89/336/EWG Ing. grad. Hans-Joachim Schaller Leitung Entwicklung und Konstruktion Metabowerke GmbH Business Unit Elektra Beckum Daimler Str. 1 D - 49716 Meppen Meppen, 25.11.2002 1001098/ 02...
-
Page 3: Parts Identification (Standard Delivery)
XA0038E1.fm Operating Instruction ENGLISH ENGLISH 1. Parts identification (standard delivery) Handle 12 Table insert Tools Safety lock 13 Rotating table locking screw – Combination 6 mm Allen key/ Phillips screwdriver ON/OFF switch 14 Positive stops table lock lever Cutting depth limiter 15 Saw base Machine documents Motor... -
Page 4: Table Of Contents
ENGLISH Retain proof of purchase in case of Stock having a round or irregular cross Table of Contents warranty claims. section (such as firewood) must not be cut, as it can not be securely held during Parts identification − If you lend or sell this machine be cutting. -
Page 5: Symbols On The Machine
ENGLISH • objects such as radiators, pipes, pieces are caught by the saw blade Before any use check tool for possi- cooking stoves, refrigerators when uncontrolled. ble damage: before operating the operating this tool. tool all safety devices, protective guards or slightly damaged parts •... -
Page 6: Safety Devices
ENGLISH − Precise and sturdy die-cast alumin- Information on the nameplate: For sawing the safety lock is pressed down. Only then can the sawhead be ium construction. lowered, opening the retractable blade − TCT saw blade. guard. − Unproblematic saw blade change by After the cut –... -
Page 7: Initial Operation
ENGLISH The rotating table engages into positive Caution! stops at the 0°, 15°, 22.5°, 30°, and 45 ° To keep the bevel angle from position. changing while sawing the locking lever of the track arm holder must be tightened. 7. Initial operation Rotating table locking screw installation •... -
Page 8: Operation
ENGLISH − fuse protection by a residual not attempt to stop the saw blade current operated device (RCD) by exerting lateral pressure. Risk of 30 mA sensitivity; of injury if the saw blade is − outlets blocked. properly installed, earthed, and tested. Standard cross cuts •... -
Page 9: Bevel Cuts
ENGLISH − Rotating table in 0° position, the locking screw of the rotating table is Height with sawhead tilted approx. tightened. 22.5° 45° − Track arm not extended. − Locking screw of the track arm loos- 15° ened. Cutting the workpiece: 22.5°... -
Page 10: Care And Maintenance
ENGLISH Saw blade change Danger! Do not use cleaning agents Danger! (e.g. to remove resin residue) that Directly after cutting the saw could corrode the light metal compo- blade may be very hot – burning haz- nents of the saw; the stability of the ard! Let a hot saw blade cool down. -
Page 11: Kerf Plate Replacement
ENGLISH Danger! − Do not extend arbor bolt tighten- ing wrench. − Do not tighten arbor bolt by hit- ting the assembly wrench. 10. Check function. To do so, lower the sawhead: − The retractable blade guard must open without touching the saw blade or any other parts. -
Page 12: Available Accessories
ENGLISH Use auxiliary fence when sawing optimal working height; Danger! small cut-offs (this may be a suitable folding, ideal for mobile use. Many accidents happen parti- board, fastened with four screws to cularly in connection with problems blade 210 x 2,0/ 1.4x the fence). -
Page 13: Available Saw Blades
ENGLISH Maximum workpiece cross section Standard cross cuts − width / height 255/ 60 255/ 60 Mitre cuts (rotating table 45°) − width / height 177/ 60 177/ 60 Bevel cuts (track arm holder 45° left) − width / height 255/ 30 255/ 30 Compound mitre cuts (rotating table 45°... - Page 14 U3a0279.fm 091 005 8010 091 005 7553 091 005 8835 – 3000 mm 091 005 8827 – 1600 mm HW 210 x 2,0 / 1,4 x 30 20 W 091 005 3230 091 005 7529 091 005 8843 HW 210 x 2,4 / 1,8 x 30 40 W 091 005 1148...
- Page 15 U4BA_EB3.fm www.elektra-beckum.de...
Need help?
Do you have a question about the KGS 255 and is the answer not in the manual?
Questions and answers
Hi. Is the Electra Beckum KGS255 identical to the Metabo KGS255? I know that Electra has merged with Metabo and only Metabo parts are available.Some. Hence my question. Thank you kindly
Yes, the Elektra Beckum KGS 255 is identical to the Metabo KGS 255.
This answer is automatically generated