Check Out And Operation - mr. steam MS-65 Installation, Operation & Maintenance Manual

•
CHECK OUT AND OPERATION
1. Turn on SMART/ONE.
- When using standard SMART/ONE control, follow specific instruction sheet provided
with controls.
- When using optional digital timer and/or temperature controls, follow specific instruction
sheets provided with controls.
2. Steam will begin to appear in a few minutes at the steam head
- When the installation includes an optional air switch, press button once and release if no
steam appears after 5 minutes.
- When system is equipped with an "optional room temperature control or digital
timer/temperature control," steam will shut off when desired temperature is reached and
will automatically resume.
3. Steam will shut off automatically when SMART/ONE counts down to zero.
- To shut steam off manually, push optional air switch once or turn off SMART/ONE.
- To clear steam from enclosure area, turn on shower before opening door.
NIAINTENANCE
MR. STEAM steambath generators are designed for unattended operation and require little
maintenance. Other than periodic draining, maintenance procedures are not required. Every 2
months, or more often in "hard" water areas, the drain valve should be opened fully flushing
out accumulated materials, salts and other particles which are natural by-products of boiling
water. Note: For best results, this should be done immediately after using the steambath
generator, while contents are still hot and with the control off! The unit will refill automatically
when power is reapplied. In areas of very hard water, a MR. STEAM autoflush system and
water treatment is recommended for generator longevity.