Download Print this page
Rohnson R-869 Instruction Manual

Rohnson R-869 Instruction Manual

Stand fan 40cm with remote control

Advertisement

Quick Links

Stand fan 40cm with remote control
Model: R-869
Instruction Manual
PLEASE READ ALL INSTRUCTIONS CAREFULLY AND
RETAIN FOR FUTURE USE

Advertisement

loading
Need help?

Need help?

Do you have a question about the R-869 and is the answer not in the manual?

Questions and answers

Summary of Contents for Rohnson R-869

  • Page 1 Stand fan 40cm with remote control Model: R-869 Instruction Manual PLEASE READ ALL INSTRUCTIONS CAREFULLY AND RETAIN FOR FUTURE USE...
  • Page 2 INSTRUCTIONS FOR USE Dear Customer, In order to avoid damage due to incorrect use, please read these Instructions for Use through carefully before connecting your device to the mains. Please pay particular attention to the safety information. If you pass the device on to a third party, these Instructions for Use must also be handed over.
  • Page 3 damaged, or if the power cable or plug are damaged. If the appliance is damaged, take it to the authorized service center for examination and if necessary repair. Never attempt to repair the appliance yourself. Doing so could cause an electric shock. Do not allow the power cable to hang over edges.
  • Page 4 Danger! Nominal voltage is still present in the appliance as long as the applian ce is connected to the mains socket. Switch the appliance off before disconnecting it from the mains. Never use the power cable to carry the appliance. Use handles to carry the ap pliance.
  • Page 6: Description Of Parts

    DESCRIPTION OF PARTS 1.Front Grill 2. Blade fastener 3. Blade 4. Rear Grill fastener 5. Rear grill 6. Motor housing 7. Extension pole tighten ring 8. Adjustable pole inner tube 9. Height adjustment ring 10. Adjustable pole outer tube 11. Round Base 12.
  • Page 7: Operation

    31. Remote control transmitter / receiver 32. ON/OFF button 33. SWING (Oscillation button) 34. Speed button 35. Mode button 36. Timer button ASSEMBLY INSTRUCTIONS 1. Place the round base (11) with heavy plate (12) on dry, flat surface 2. Release the adjustable pole inner tube (8) by loosening the height adjustment ring (9).
  • Page 8: Adjust Tilt Angle

    7. Press timer button continuously to preset auto switch off timer. Indicator light up according to the desire timer Count down timer up to 7.5hrs with indicator light on the control panel. Important: Remote control transmitter / receiver (31) for infrared transmission to the device, so need to toward the Remote sensor (20) in all operating modes.
  • Page 9 IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2002/96/EC. At the end of its working life, the product must not be disposed of as urban waste. It must be taken to a special local authority differentiated waste collection centre or to a dealer providing this service.