Rohnson R-865 Instruction Manual

INSTRUCTION MANUAL
VINTAGE TABLE FAN
R-865 / R-866
Vol/Hz
Model No.
R-865 / R-866 220-240V/50Hz
Please read and follow all instructions before use.

Safety Warnings

1. Please unplug the fan before moving it or carrying out any
maintenance. Don't touch the fan when your hands are wet.
2. Those who are not qualified electricians should not disassemble,
repair or rebuild the fan.
3. Please unplug the fan when it is not in use.
4. Please don't unplug the fan by holding the cable cord. Unplug by
holding the plug.
5. Please don't use the fan when there is damage to the cable cord
or plug.
6. Please don't use the fan with an extension cord.
7. Please don't use the fan close to fires.
8. Please don't insert your hand into the guard or the movable parts.
9. To reduce the risk of fire or electric shock, do not use this fan with
any solid-state speed control device.

Care and Cleaning

1. Please unplug the fan from the socket and clean it with a soft
cloth.
2. Do not immerse the fan
3. Please note if any damage on the fan blade
4. Please fit the cover onto fan after maintenance and before using.

Operating Instructions

The fan is completely assembled upon delivery. The fan comes with
three different speeds.
Power
Adjust the desired speed by rotating the speed controller: (B1)
(W)
0 - Stop 1 - Low 2 - Medium 3 - High
37
The fan comes with an additional oscillation function.
Turn the oscillation function on by pushing the oscillation button
down (B2).