Download Print this page

Advertisement

Quick Links

STAND FAN 2 IN 1 ( 16"- 40cm)
Model: R-849
INSTRUCTION MANUAL

Advertisement

loading
Need help?

Need help?

Do you have a question about the R-849 and is the answer not in the manual?

Questions and answers

Summary of Contents for Rohnson R-849

  • Page 1 STAND FAN 2 IN 1 ( 16”- 40cm) Model: R-849 INSTRUCTION MANUAL...
  • Page 2 (PLEASE READ THIS USER’S MANUAL THROUGHLY BEFORE USING.) ⚫ Safety Instruction 1. Never put your finger or other something into the cover to avoid any hurts. 2. Make sure to keep the fan far away from humidity, chemical articles and oil. 3.
  • Page 3 Children should be supervised to ensure that they do not play with the appliance. ⚫ Parts Description of R-849...
  • Page 4 1. Clamping ring 2. Front guard 3. Blade fastening screw 4. Fan blade 5. Guard fastening screw 6. Rear guard 7. Motor shaft 8. Control panel 9. Upper standing shaft 10. Lower standing shaft 11. Standing base 12. Screws 13. Remote control...
  • Page 5: Assembling Instructions

    ⚫ ASSEMBLING INSTRUCTIONS Base and Standing Shaft Assembly a. Attach the lower standing shaft onto the standing base. Use screws to fix the shaft firmly. b. Insert the upper standing shaft into the lower standing shaft, turning the upper standing shaft clockwise to tighten the connection of the two shafts.
  • Page 6: Operation

    OPERATION Connect the appliance to a suitable power source. Then press the control panel or the remote control to choose your desired functions. 1. ON/OFF: Press to turn the appliance on. It will work with the following presetting: Speed: low / Mode: normal / Timer: off / Swing: off Press again to turn off the appliance.
  • Page 7 seconds… (Repeating) 3) Sleeping: under this mode, the fan will operate as follows: 5 seconds medium wind -> 10 seconds low wind -> 5 seconds medium wind -> 5 seconds low wind -> 5 seconds medium wind -> 10 seconds low wind -> stop 3 seconds…(Repeating) Note: In natural mode or sleeping mode, the motor works with the preset speed.
  • Page 8: Technical Data

    CLEANING a. Before servicing the fan and after each occasion of use, switch off the appliance and unplug the mains cable from the socket. b. Never immerse the appliance in water (danger of short-circuit). To clean the appliance, only wipe it down with a damp cloth and dry it carefully.
  • Page 9 IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2002/96/EC. At the end of its working life, the product must not be disposed of as urban waste. It must be taken to a special local authority differentiated waste collection centre or to a dealer providing this service.