Intermec SR60 Instructions

Use the SR60 holster to conveniently attach the scanner to your
belt, a forklift, or a post. The anti-skid material on the back of the
holster helps keep it positioned correctly when you attach it to a
forklift or a post.
The holster kit contains these parts:
• Holster accessory
• Two black zip ties
• This instruction sheet
To attach holster to your belt
1 Unsnap the flap on the back of the holster.
2 Place the holster over your belt and snap the flap back together.
You can position the holster on either your right or left side.
3 Insert the SR60 into the holster.
SR60 Holster: This illustration shows the SR60 inserted into the holster
attached to a belt.
SR60 Holster Instructions