HOMCOM A90-307 Assembly Instruction Manual page 18

STEP 7:
Attach the Handlebar (No. 6) into the
Rotating Arm Rest (No. 4) using 2
Bolts (No. 15), 2 Washers (No. 52),
two Washers (No. 45) and two Nuts
(No. 39). Tighten and secure with
Allen Wrench (No. 14) and Spanner
(No. 17).
STEP 8:
Make sure the arrow on the Seat (No.
19) points to the pedals. Attach the
Seat (No. 19) to the Seat Support
(No. 8) using 4 Screws (No. 43) and 4
Washers (No. 45). Tighten and secure
with Allen Wrench (No. 14).
The assembly is complete!
-18-