Page 1
Instruction manual 1 OHM 2 OHMS 4 OHMS The installation of this product must be made by a qualified professional.
Page 2
12 months from the date of purchase. In case of defect during the warranty period, TARAMPS responsibility is limited to the repairing or replacement of the device of its own making.
CAUTION injury to user or product damage. Taramps reserves the right to modify the contents of this document at any time without prior notice and does not have the obligation to apply the changes in units which were previously produced.
Functions & inputs + - - + HIGH INPUT AUTO REMOTE INPUT GAIN SUBSONIC FREQ. BOOST CROSSOVER BASS BOOST INPUT 1 - HIGH LEVEL INPUT: Input two high level / low impedance signals (from the speaker output of the head unit), it features function auto turn on by the input signal, compatible with head units with speaker diagnosis (A.S.S.
Amplifier 1 Ohm / 2 Ohms / 4 Ohms 3 4 5 1 - FAN: The BASS 1200, has one internal fan, and cannot be blocked. This fan is controlled by an intelligent system (Smart Cooler). The fan only runs at maximum speed after the product reach a certain temperature level.
The normal working temperature is 70°C (158°F). *Illustrative images Avoid contact with this surface when the amplifier is in use. 16 mm² (5 AWG) RCA Cable Taramps 16 mm² (5 AWG) Head Unit At least 65 Ah required battery capacity Remote Cable 0,75mm² 18 AWG...
50 °C case temperature and 14.4 V supply voltage. The values as above are typical and may vary, due to electronic components tolerance or manufacturing process. For further informations or questions, visit our website or contact TARAMPS support. fc=250 Hz...
Page 8
Manufactured by: TARAMPS ELECTRONICS LTDA TAX ID: 11.273.485/0001-03 Highway: Julio Budisk, SN, KM 30 Alfredo Marcondes - SP Made in Brazil...
Need help?
Do you have a question about the BASS 1200 and is the answer not in the manual?
Questions and answers