Related Manuals for Taramps BASS 400
Summary of Contents for Taramps BASS 400
- Page 1 Instruction manual AMPLIFIER 400WATTS RMS - 1 OHM 4 OHMS The installation of this product must be made by a qualified professional.
- Page 2 12 months from the date of purchase. In case of defect during the warranty period, TARAMPS’ responsibility is limited to the repairing or replacement of the device of its own making.
-
Page 3: Safety Requirements
CAUTION injury to user or product damage. Taramps reserves the right to modify the contents of this document at any time without prior notice and does not have the obligation to apply the changes in units which were previously produced. -
Page 4: Led Indicator
8 - MONITOR LEVEL REMOTE: The Monitor Level Remote accessory (sold separately) has three indicator LEDs: On, Clip and Protection. When used with the BASS 400 amplifier, only the On LED (blue) will be activated, as the amplifier does not have Clip and Protection indicators. -
Page 5: Protection System
Output & power supply connector SPEAKER POWER INPUT 1 - SPEAKER: Output (positive and negative) for connecting transducers (speakers). Follow the indicated polarity. For speaker’s associations, the impedance to consider is the resulting impedance: See the examples below: For PARALLEL connection For PARALLEL connection Dual voice coil speaker 2 Single voice coil speakers... -
Page 6: Installation
The normal working temperature is 70°C (158°F). Avoid contact with this surface when the amplifier is in use. RCA Cable Taramps Head Unit Remote Cable 18 AWG Wired Input: If you choose to use this input, you will not need to connect the RCA cables or the Remote cable. -
Page 7: Technical Features
50°C case temperature and 14.4 V supply voltage. The values as above are typical and may vary, due to electronic components tolerance or manufacturing process. For further informations or questions, visit our website or contact TARAMPS’ support. - Page 8 Manufactured by: TARAMPS ELECTRONICS LTDA TAX ID: 11.273.485/0001-03 Highway: Júlio Budisk, SN, KM 30 Alfredo Marcondes - SP Made in Brazil...
Need help?
Do you have a question about the BASS 400 and is the answer not in the manual?
Questions and answers